1、ANSI C82.2 2002 Revision of ANSI C82.2-1994(R1995) Copyright 2002 by American National Standard Lighting Group- NEMA American National Standard Approved: June 6, 2002 Secretariat: ANSLG- National Electrical Manufacturers Association For Lamp Ballasts- Method of Measurement of Fluorescent Lamp Ballas
2、ts An American National Standard implies a consensus of those substantially concerned with its scope and provisions. It is intended as a guide to aid the manufacturer, the consumer, and the general public. The existence of an American National Standard does not in any respect preclude anyone, whethe
3、r he has approved the standard or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. Users are cautioned to obtain the latest editions. The American National Standards Institute does not develop standards and will in no circum
4、stances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. CAUTION NOTICE: This American National Standard may be revised
5、 or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the Americ
6、an National Standards Institute. Copyright National Electrical Manufacturers Association Provided by IHS under license with NEMANot for ResaleNo reproduction or networking permitted without license from IHS-ANSI C82.2-2002 Revision of ANSI C82.2-1984 (R1995) Copyright 2002 by American National Stand
7、ard Lighting Group- NEMA iiAmerican National Standard Approval of an American National Standard requires verification by ANSI that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. An American National Standard implies a consensus
8、of those substantially concerned with its scope and provisions. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, bu
9、t not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. The existence of an American National Standard does not in any respect preclude anyone, whether s/he has approved the standard or not, from manufa
10、cturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. It is intended as a guide to aid the manufacturer, the consumer, and the general public. The American National Standards Institute does not develop standards and will in no circumstances give
11、 an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretations should be addressed to the Committee Secretar
12、iat referred to on the title page. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American Nat
13、ional Standards may receive current information on all standards by calling or writing the American National Standards Institute. Printed and distributed by: Information Handling Services/Global Engineering Documents 15 Inverness Way East, Englewood, CO 80112-5776 Under Contract with National Electr
14、ical Manufacturers Association Copyright 2002 by American National Standard Lighting Group In Affiliation with National Electrical Manufacturers Association All rights reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without prior w
15、ritten permission of the publisher. Printed in the United States of America Copyright National Electrical Manufacturers Association Provided by IHS under license with NEMANot for ResaleNo reproduction or networking permitted without license from IHS-ANSI C82.2-2002 Revision of ANSI C82.2-1984 (R1995
16、) Copyright 2002 by American National Standard Lighting Group- NEMA iii This standard is Dedicated to the memory of J. F. Luchetta Who gave more than 40 years of service to the lighting industry. We will miss you. 1933-2001Copyright National Electrical Manufacturers Association Provided by IHS under
17、 license with NEMANot for ResaleNo reproduction or networking permitted without license from IHS-ANSI C82.2-2002 Revision of ANSI C82.2-1984 (R1995) Copyright 2002 by American National Standard Lighting Group- NEMA ivThis Page Intentionally Left Blank Copyright National Electrical Manufacturers Asso
18、ciation Provided by IHS under license with NEMANot for ResaleNo reproduction or networking permitted without license from IHS ANSI C82.2-2002 Revision of ANSI C82.2-1984 (R1995) Copyright 2002 by American National Standard Lighting Group- NEMA v Foreword (This Foreword is not part of ANSI C82.2-2002
19、.) Suggestions for improvement of this standard should be submitted to the Secretariat C82, American National Lighting Group of the National Electrical Manufacturers Association, 1300 North 17th Street, Suite 1847, Rosslyn, VA 22209. This standard was processed and approved by Accredited Standards C
20、ommittee on Lamp Ballasts, C82, and its Sub-Committee, C82-1. Committee approval of the standard does not necessarily imply that all committee members voted for that approval Information concerning the approval of this standard is based on the documents listed in the table below: CDV RV C82(1)/m680
21、C82(1)/m681v2 At the time of publications the C82 committee consisted of the following members: Howard Wolfman, Chair C82 Ken Denton, Technical Coordinator Randolph N. Roy, Secretariat Ken Denton, Consulting Editor Organization Represented: Name of Representative: Advance Transformer Company .Robert
22、 Erhardt Cooper Lighting (NEMA Delegate). Donald Miletich Edison Electric Institute (Delegate). Al Maguire GE Lighting . Edward Yandek Edward Hammer Selmar DorseyGE Lighting Systems . Michael Owens Rebecca LancasterHolophane Lighting Company. Michael Tanner Hubbell Lighting, Inc. (NEMA Delegate) . W
23、illiam E. Buckson InterTek Testing Services . David Edwards David Ellis Lithonia/Hi-Tek Lighting (NEMA Delegate) . Fred Carpenter MagneTek Lighting Products Group .Bill Brosius Michael Stein OSRAM SYLVANIA.Howard Wolfman Joe Parisella Philips Lighting Company.Al Rousseau Underwriters Laboratories In
24、c. .John Marshall David Belt Copyright National Electrical Manufacturers Association Provided by IHS under license with NEMANot for ResaleNo reproduction or networking permitted without license from IHS-ANSI C82.2-2002 Revision of ANSI C82.2-1984 (R1995) Copyright 2002 by American National Standard
25、Lighting Group- NEMA viAt the time it approved this standard, the C82-1 Work Group had the following members: Ken Denton, Chair, C82-1 Randolph N. Roy, Secretariat Organization Represented: Name of Representative: Advance Transformer Company.Robert Erhardt Beth Jug GE Lighting . Edward M. Yandek Edw
26、ard E. Hammer Howard Industries Inc. . Wayne Causey Eric Brown Industrias Sola Basic. Emilio Catan G. Gerardo Arias InterTek Testing Services . David Edwards Lutron Electronics Co. Inc. . Robert Newman Jr. MagneTek Lighting Products Group.Thomas Poehlman Robert BurkeManufacturera De Reactores . Garc
27、ia Azcue OSRAM SYLVANIA INC. . Howard Wolfman Joe Parisella Philips Lighting Company. Thomas O. Leyh Al C. Rousseau Power Lighting Products Inc. Marcelino Garcia Thomas & BettsAmerican Electric . Greg Steinman Underwriters Laboratories Inc. . John Marshall ZAE Research. Ken Denton Copyright National
28、 Electrical Manufacturers Association Provided by IHS under license with NEMANot for ResaleNo reproduction or networking permitted without license from IHS-ANSI C82.2-2002 Revision of ANSI C82.2-1984 (R1995) Copyright 2002 by American National Standard Lighting Group- NEMA vii Table of Contents Fore
29、word . v 1 Scope . 1 2 Normative references . 1 3 Pertinent measurements . 1 4 Electrical supply characteristics- test ballast measurement circuits . 2 5 Electrical supply characteristics - reference ballast measurement circuits. 3 6 Ambient conditions for lamp measurements . 3 7 Test measurement ci
30、rcuits . 3 8 Electrical Instruments . 5 9 Open circuit voltage. 5 10 Starting current for instant start and rapid start ballasts . 6 11 Input power factor. 7 12 Ballast factor. 7 13 Ballast efficiency factor (BEF) . 8 14 Ballast regulation. 8 15 Current measurements. 8 16 Cathode heating- voltage re
31、quirements . 10 17 Cathode heating preheat current requirements. 10 18 Starter terminal voltage . 11 19 Starting capacitor. 11 Figures Figure 1 - Input-characteristics measurement circuit .4 Figure 2 - Lamp-characteristics measurement circuit .4 Figure 3 Measurement of peak and RMS lamp current for
32、rapid start lamps .10 Copyright National Electrical Manufacturers Association Provided by IHS under license with NEMANot for ResaleNo reproduction or networking permitted without license from IHS-ANSI C82.2-2002 Revision of ANSI C82.2-1984 (R1995) Copyright 2002 by American National Standard Lightin
33、g Group- NEMA viiiThis Page Intentionally Left Blank Copyright National Electrical Manufacturers Association Provided by IHS under license with NEMANot for ResaleNo reproduction or networking permitted without license from IHS-ANSI C82.2-2002 Revision of ANSI C82.2-1984 (R1995) Copyright 2002 by Ame
34、rican National Standard Lighting Group- NEMA 1 AMERICAN NATIONAL STANDARD For Lamp Ballasts- Method of Measurement of Fluorescent Lamp Ballasts 1 Scope This standard outlines the procedures to be followed and the precautions to be observed in measuring and testing line frequency fluorescent lamp bal
35、lasts as specified in C82.1 with either hot-cathode or cold-cathode fluorescent lamps. 2 Normative references This standard is intended for use in conjunction with the following American National Standards. When the American National Standards referred to in this document are superseded by a revisio
36、n approved by the American National Standards Institute, Inc. the revision shall apply. ANSI/NFPA No. 70-1993, National Electrical Code ANSI C78.1-1991 (R1996), C78.2-1991 (R1996), C78.3-1991 (R1996), C78.4-1992 (R1997), American National Standards for Dimensional and Electrical Characteristics of F
37、luorescent Lamps ANSI C78.375-1997, American National Standard for Fluorescent Lamps- Guide for Electrical Measurements ANSI C82.1-1997, American National Standard for Lamp Ballast- Line Frequency Fluorescent Lamp Ballasts ANSI C82.3-1983 (R1998), American National Standard Specification for Fluores
38、cent Lamp Reference Ballasts Code of Federal Regulations 10CFR430, Energy Conservation Program for Consumer Products ANSI/UL 935-1992, Underwriters Laboratories Inc., Standard for Fluorescent Lamp Ballasts 3 Pertinent measurements The measurements in 3.1 and 3.2 are required to determine the complia
39、nce of ballast and ballast-lamp combinations with the specification of ANSI C82.1. Additional limitations as related to specific test conditions are listed in the appropriate lamp data sheets. Copyright National Electrical Manufacturers Association Provided by IHS under license with NEMANot for Resa
40、leNo reproduction or networking permitted without license from IHS-ANSI C82.2-2002 Revision of ANSI C82.2-1984 (R1995) Copyright 2002 by American National Standard Lighting Group- NEMA 23.1 Ballast output circuit measurements 3.1.1 Lamp starting conditions RMS open-circuit voltage Peak open-circuit
41、voltage Lamp voltage waveshape - crest factor Maximum-peak (open-circuit) voltage from starting aid to any cathode on each lamp circuit (rapid start ballast) Capacitance of starting capacitor(s) (rapid start ballast) RMS voltage to cathode dummy-load (rapid start ballast) RMS current through dummy-load resistor (instant start ballast and some rapid start ballasts) RMS preheat current (preheat start ballasts) 3.1.2 Lamp oper