DB31 T 478.24-2017 《主要工业产品用水定额及其计算方法 第24部分：豆制品》.pdf

相关资源

JIS G0702-1995 连续式钢材加热炉的热平衡计算方法.pdf

JIS G0703-1995 电弧炉热平衡计算方法.pdf

GB T 27724-2011 普通长网造纸机系统能量平衡及能量效率计算方法.pdf

GB T 27727-2011 筛选、CEHP四段漂白系统能量平衡及能量效率计算方法.pdf

GB T 17247.2-1998 声学 户外声传播的衰减 第2部分：一般计算方法.pdf

GB T 27736-2011 制浆造纸企业生产过程的系统能量平衡计算方法通则.pdf

JIS C8020-2005 荧光照明设备能效指数的计算方法.pdf

JIS C9901-2010 电气和电子装置的能效达标百分率的计算方法和表达式.pdf

JIS G4310-1999 不锈钢板、薄板及耐热钢板、薄板的质量计算方法.pdf

JIS K2283-2000 原油及石油产品运动粘度的测定方法及石油产品粘度指数的计算方法.pdf

猜你喜欢

GOST 24253-1980 Square throw-away (indexable) carbide cutting inserts with 20 end-clearance angle Design and dimensions《可转位的后面20角的多面硬质合金矩形切削刀片 结构及尺寸》.pdf

GOST 24254-1980 Rhombic throw-away (indexable) carbide shims with 55 included angle Design and dimensions《可转位的菱形55角的多面硬质合金支承刀片 结构及尺寸》.pdf

GOST 24255-1980 Rhombic throw-away (indexable) carbide cutting inserts with 55 included angle and cylindrical holes Design and dimensions《可转位的菱形55带孔角的多面硬质合金切削刀片 结构及尺寸》.pdf

GOST 24256-1980 Rhombic throw-away (indexable) carbide cutting inserts with 55 included angle with cylindrical holes and chip-breaking flutes on one face only Design and dimensions.pdf

GOST 24257-1980 Rhombic throw-away (indexable) carbide cutting inserts with 55 included angle with cylindrical holes and chip-breaking flutes on both faces Design and dimensions《可转.pdf

GOST 24258-1988 Different types of scaffolding General specifications《搭跳板脚手架材料 分类和一般技术要求》.pdf

GOST 24259-1980 Assembling equipment for temporary fastening and adjusting construction buildings Classification and general technical requirements《建筑物结构临时固定和校正用装配设备 分类和一般技术要求》.pdf

GOST 24260-1980 Wood raw material for pirolysis and charring Specifications《干馏和炭化用的木材原料 技术条件》.pdf

GOST 24261-1980 Dentaltechnics Symbols Shapes and dimensions Technical requirements《牙科器械 符号 形状和尺寸 技术要求》.pdf