1、 IEC 61169-40 Edition 1.0 2010-11 INTERNATIONAL STANDARD NORME INTERNATIONALE Radio-frequency connectors Part 40: Sectional specification for 2.4 series RF connectors Connecteurs pour frquences radiolectriques Partie 40: Spcification intermdiaire pour les connecteurs RF srie 2.4 IEC 61169-40:2010 co
2、lour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2010 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without
3、permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committe
4、e for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI
5、 ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Offic
6、e 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About
7、 IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you t
8、o search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new p
9、ublications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as
10、the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +4
11、1 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu techni
12、que des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des rec
13、herches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille
14、 deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les te
15、rmes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
16、Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 61169-40 Edition 1.0 2010-11 INTERNATIONAL STANDARD NORME INTERNATIONALE Radio-frequency connectors Part 40: Sectional specification for 2.4 series RF connectors Connecteurs pour frquences radiolectri
17、ques Partie 40: Spcification intermdiaire pour les connecteurs RF srie 2.4 INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE T ICS 33.120.30 PRICE CODE CODE PRIX ISBN 978-2-88912-255-4 Registered trademark of the International Electrotechnical Commission Marque dpo
18、se de la Commission Electrotechnique Internationale colour inside 2 61169-40 IEC:2010 CONTENTS FOREWORD.4 1 Scope 6 2 Normative references .6 3 Mating face and gauge information .7 3.1 Dimensions High performance connectors Grade 1.7 3.1.1 Connector with pin-centre contact 7 3.1.2 Connector with soc
19、ket-centre contact .8 3.2 Gauges .9 3.2.1 Gauge pins for socket-centre contact9 3.2.2 Test procedure.9 3.3 Dimensions Standard test connectors Grade 0 .10 3.3.1 Connector with pin-centre contact 10 3.3.2 Connector with socket-centre contact .11 4 Quality assessment procedure12 4.1 General.12 4.2 Rat
20、ing and characteristics (see Clause 6 of IEC 61169-1) 12 4.3 Test schedule and inspection requirements15 4.3.1 Acceptance tests .15 4.3.2 Periodic tests.15 4.4 Procedures17 4.4.1 Quality conformance inspection17 4.4.2 Qualification approval and its maintenance.17 5 Instructions for preparation of de
21、tail specifications 17 5.1 General.17 5.2 Identification of the detail specification.17 5.3 Identification of the component 17 5.4 Performance18 5.5 Marking, ordering information and related matters 18 5.6 Selection of tests, test conditions and severities.18 6 Blank detail specification pro-forma f
22、or 2.4 connectors 19 Bibliography .24 Figure 1 Connector with pin-centre contact (for dimensions and notes, see Table 1) 7 Figure 2 Connector with socket-centre contact (for dimensions and notes, see Table 2)8 Figure 3 Gauge pins for socket-centre contact (for dimensions and notes, see Table 3)9 Fig
23、ure 4 Connector with pin-centre contact (for dimensions and notes, see Table 4) 10 Figure 5 Connector with socket-centre contact (for dimensions and notes, see Table 5)11 61169-40 IEC:2010 3 Table 1 Dimensions of connector with pin-centre contact 7 Table 2 Dimensions of connector with socket-centre
24、contact.8 Table 3 Dimensions of gauge pins for socket-centre contact .9 Table 4 Dimensions of connector with pin-centre contact 10 Table 5 Dimensions of connector with socket-centre contact.11 Table 6 Preferred climatic categories (see IEC 60068-1).12 Table 7 Rating and characteristics13 Table 8 Acc
25、eptance tests.15 Table 9 Periodic tests 15 4 61169-40 IEC:2010 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RADIO-FREQUENCY CONNECTORS Part 40: Sectional specification for 2.4 series RF connectors FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standard
26、ization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes Intern
27、ational Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate
28、in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between t
29、he two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications ha
30、ve the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any mis
31、interpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding nati
32、onal or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services
33、carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National
34、 Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is dr
35、awn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall no
36、t be held responsible for identifying any or all such patent rights. International Standard IEC 61169-40 has been prepared by subcommittee 46F: R.F. and microwave passive components, of IEC technical committee 46: Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components and
37、accessories. This first edition cancels and replaces IEC/PAS 61169-40, published in 2008, of which it constitutes a minor revision. The changes with respect to the PAS are solely editorial. The text of this standard is based on the following documents: CDV Report on voting 46F/167/CDV 46F/180/RVC Fu
38、ll information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. 61169-40 IEC:2010 5 A list of all parts in the IEC 61169 series, published under the
39、general title Radio-frequency connectors, can be found on the IEC website. The committee has decided that the contents of this amendment and the base publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the spec
40、ific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its
41、contents. Users should therefore print this document using a colour printer. 6 61169-40 IEC:2010 RADIO-FREQUENCY CONNECTORS Part 40: Sectional specification for 2.4 series RF connectors 1 Scope This part of IEC 61169 provides information and rules for preparation of detail specification of 2.4 serie
42、s R.F connectors together with the pro-forma blank detail specification. The 2.4 series thread mated connectors with characteristic impedance 50 are used for millimeter wave applications, connecting with RF cables or microstrips. The operating frequency limit is up to 50 GHz. These connectors can be
43、 intermated with 1,85 mm (IEC 61169-32 and IEEE 287-2007) connectors. It also prescribes mating face dimensions for high performance connectors grade 1, dimensional detail of standard test connectors grade 0, gauging information and tests selected from IEC 61169-1 applicable to all detail specificat
44、ions relating to 2.4 series RF connectors. This specification indicates recommended performance characteristics to be considered when writing a detail specification and it covers test schedules and inspection requirements for assessment levels M and H. NOTE Metric dimension are original dimensions.
45、All undimensioned pictorial configurations are for reference purpose only. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referen
46、ced document (including any amendments) applies. IEC 61169-1:1992, Radio-frequency connectors Part 1: Generic specification General requirements and measuring methods 1Amendment 1 (1996) Amendment 2 (1997) IEC 60068-1, Environmental testing Part 1: General and guidance _ 1There exists a consolidated
47、 edition 1.2 (1998) that comprises IEC 61169-1:1992, its Amendment 1:1996 and its Amendment 2:1997. 61169-40 IEC:2010 7 3 Mating face and gauge information 3.1 3.1.1 Dimensions High performance connectors Grade 1 Connector with pin-centre contact e 45 5 b a q c d R f j h n m l r g k p See detail A N
48、ote 1 Note 2 Gasket Detail A IEC 2543/10 Figure 1 Connector with pin-centre contact (for dimensions and notes, see Table 1) Table 1 Dimensions of connector with pin-centre contact mm Ref. Min. Max. Notes a 1,850 2,450 b 4,340 4,660 c 0,000 0,076 d 3,380 3,480 e 0,200 0,400 f 0,050 g 56 64 h 1,029 1,
49、054 j 1,270 1,524 k 0,200 0,300 l 7,010 7,110 m 4,725 4,750 n 2,387 5 2,412 5 p 0,506 0,523 q 0,510 0,770 r M7 0,75-6H NOTE 1 Mechanical and electrical reference plane. NOTE 2 Gasket possible on grade 1 connectors. 8 61169-40 IEC:2010 3.1.2 Connector with socket-centre contact j 45 5 b a l c d R g m e p k f See detail A Note 1 Not
