1、 IEC 62149-1 Edition 2.0 2011-12 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic active components and devices Performance standards Part 1: General and guidance Composants et dispositifs actifs fibres optiques Normes de performances Partie 1: Gnralits et lignes directrices IEC62149-1:2011 c
2、olourinsideTHIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2011 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without p
3、ermission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee
4、 for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI
5、ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office
6、 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About
7、IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to
8、 search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new pu
9、blications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as t
10、he International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41
11、 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu techniq
12、ue des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des rech
13、erches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille
14、deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les ter
15、mes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du S
16、ervice clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 62149-1 Edition 2.0 2011-12 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic active components and devices Performance standards Part 1: General and guidance Composants et dispositifs actifs fib
17、res optiques Normes de performances Partie 1: Gnralits et lignes directrices INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE N ICS 33.180.20 PRICE CODE CODE PRIX ISBN 978-2-88912-816-7 Registered trademark of the International Electrotechnical Commission Marque d
18、pose de la Commission Electrotechnique Internationale colourinside 2 62149-1 IEC:2011 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 7 4 Preparation of a performance standard . 7 4.1 General . 7 4.2 Product definition 7 4.3 Tests . 7 4.4 Detai
19、ls . 8 4.5 Requirements 8 4.6 Sample size 8 4.7 Groupings/sequences 8 4.8 Pass/fail criteria 8 4.9 Reference product definition 8 4.10 Performance standard test report 8 4.11 Environmental aspects 9 Annex A (normative) Tests and severities for performance standards 10 Bibliography 14 Table A.1 Gener
20、al operating service environments and definitions . 10 Table A.2 Category C Controlled environment . 11 Table A.3 Category U Uncontrolled environment . 11 Table A.4 Category O Outside plant environment 12 Table A.5 Category E Extreme environment 13 62149-1 IEC:2011 3 INTERNATIONAL ELECTROTECHNICAL C
21、OMMISSION _ FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES PERFORMANCE STANDARDS Part 1: General and guidance FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The
22、object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specific
23、ations (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations li
24、aising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters expr
25、ess, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Commit
26、tees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC Nationa
27、l Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does no
28、t provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have t
29、he latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoeve
30、r, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publication
31、s is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard
32、IEC 62149-1 has been prepared by subcommittee SC 86C: Fibre optic systems and active devices of IEC technical committee TC 86: Fibre optics. This second edition cancels and replaces the first edition published in 2004 and its corrigendum 1 (2004). It is a technical revision. The technical change con
33、sists of an update in Table A.1. The text of this standard is based on the following documents: CDV Report on voting 86C/1016/CDV 86C/1037A/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. 4 62149-1 IEC:2011 This
34、publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication.
35、At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 62149-1 IEC:2011 5 INTRODUCTION Performance standards define standard electro-optical performance under a set of prescribed conditions and contain a series or a set of tests and measurements (whi
36、ch may or may not be grouped into a specific schedule) with clearly defined conditions, severities and pass/fail criteria. The tests are intended to be run on as an initial design verification to prove the products ability to satisfy the requirements of a specific application, market sector or user
37、group. The subsequent parts of this document contain those sets of performance criteria that have been standardised for international use. A product that has been shown to meet all the requirements of a performance standard may be declared as complying with that performance standard. Products from o
38、ne manufacturer that are tested to a performance standard will operate together within the bounds of the criteria set by the performance standard. There is however no guarantee that products from different suppliers having the same standard interface, which have been independently tested to a perfor
39、mance standard, will meet the same levels of optical performance when mated together as those supplied by one manufacturer. Compliance with a performance standard demonstrates that a product has in essence passed a design verification test, it is not a guarantee of lifetime assured performance nor r
40、eliability. Both service life tests and reliability testing must be the subject of a separate test schedule where the tests and severities selected are such that they are truly representative of the requirements of these test programmes. Consistency of manufacture should be maintained using a recogn
41、ised quality assurance programme while the reliability of the product should be evaluated using the procedures recommended in IEC 62005 and IEC 61751. Where possible, tests and measurements should be selected from IEC 61300. Where this is not possible, the required test method shall be attached as a
42、n annex to the performance standard. 6 62149-1 IEC:2011 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES PERFORMANCE STANDARDS Part 1: General and guidance 1 Scope This part of IEC 62149 provides references, definitions and rules for creating active fibre optic device performance standards, as well as rela
43、ted information pertinent to the subject. Subsequent parts of IEC 62149 are sequentially numbered and contain performance criteria for specific applications. Each part will be added as the performance criteria become standardised for international use. 2 Normative references The following documents,
44、 in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60068-2-27, Environmental t
45、esting Part 2-27: Tests Test Ea and guidance: Shock IEC 61300-2-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-1: Tests Vibration (sinusoidal) IEC 61300-2-4, Fibre optic interconnecting devices and passive components Basic test and measurem
46、ent procedures Part 2-4: Tests Fibre/cable retention IEC 61300-2-5, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-5: Tests Torsion IEC 61300-2-9, Fibre optic interconnecting devices and passive components Basic test and measurement procedures
47、 Part 2-9: Tests Shock IEC 61300-2-17, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-17: Tests Cold IEC 61300-2-18, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-18: Tests Dry heat Hig
48、h temperature endurance IEC 61300-2-19, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-19: Tests Damp heat (steady state) IEC 61300-2-21, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-2
49、1: Tests Composite temperature/humidity cyclic test IEC 61300-2-22, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-22: Tests Change of temperature IEC 61300-2-26, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-26: Tests Salt mis
