1、 IEC 62792 Edition 1.0 2015-02 INTERNATIONAL STANDARD NORME INTERNATIONALE Measurement method for the output of electroshock weapons Mthode de mesure de la sortie des pistolets impulsion lectrique IEC 62792:2015-02(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2015 IEC, Geneva, Switzerlan
2、d All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of
3、the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucun
4、e partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyri
5、ght de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switz
6、erland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept
7、 under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Te
8、chnical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also give
9、s information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org T
10、he worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossa
11、ry More than 60 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.
12、ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales
13、 pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue I
14、EC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC
15、- www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Re
16、stez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient plus de 30 000 te
17、rmes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 15 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 60 000 entres terminologiques lectrotechniques, en anglais et en franais
18、, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous av
19、ez des questions contactez-nous: csciec.ch. IEC 62792 Edition 1.0 2015-02 INTERNATIONAL STANDARD NORME INTERNATIONALE Measurement method for the output of electroshock weapons Mthode de mesure de la sortie des pistolets impulsion lectrique INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTRO
20、TECHNIQUE INTERNATIONALE ICS 17.220.20, 95.020 ISBN 978-2-8322-2222-5 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! V
21、euillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 62792:2015 IEC 2015 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms and definitions 7 4 Test measurement system . 15 4.1 General . 15 4.2 Instrumentation requirements 15 Gener
22、al . 15 4.2.1Minimum performance requirements 16 4.2.2Measurement system traceability . 16 4.2.3System calibration . 17 4.2.4 4.3 Environmental conditions 20 4.4 Electrostatic discharge (ESD) . 20 4.5 Current waveform measurements 21 General . 21 4.5.1Measurement set-up 21 4.5.2Current probe require
23、ments . 22 4.5.3Waveform acquisition 22 4.5.4 4.6 Voltage waveform measurements . 22 General . 22 4.6.1Measurement set-up 23 4.6.2Voltage probe requirements . 23 4.6.3Waveform acquisition 24 4.6.4 5 Waveform parameters . 24 5.1 General . 24 5.2 Waveform parsing . 24 5.3 Initial and final instants .
24、24 5.4 Average level 25 5.5 Average absolute level 25 5.6 Charge, net . 25 5.7 Charge, total . 26 5.8 Energy, pulse 26 5.9 Impulse amplitude . 26 5.10 Peak, maximum (minimum) . 26 5.11 Peak-to-peak value . 26 5.12 Pulse duration . 26 5.13 Pulse separation . 27 5.14 Offset 27 5.15 Transition duration
25、 27 5.16 Transition settling duration 27 5.17 Transition settling error . 27 5.18 Waveform period . 27 Bibliography 28 IEC 62792:2015 IEC 2015 3 Figure 1 Diagram of the ESW measurement system with voltage and current probes in place . 15 Figure 2 Set up for calibrating vertical channel of ESW measur
26、ement system 18 Figure 3 Set up for calibration of the magnitude frequency response of the ESW measurement system 19 Figure 4 Set up for calibration of time response of ESW measurement system 20 Table 1 Waveform recorder minimum performance specifications 16 Table 2 Initial instants and final instan
27、ts for the waveform sub-epochs . 25 4 IEC 62792:2015 IEC 2015 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ MEASUREMENT METHOD FOR THE OUTPUT OF ELECTROSHOCK WEAPONS FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national
28、electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Spe
29、cifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. Intern
30、ational, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The for
31、mal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations f
32、or international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user.
33、4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication sha
34、ll be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certi
35、fication bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal inj
36、ury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references
37、cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identi
38、fying any or all such patent rights. International Standard IEC 62792 has been prepared by IEC technical committee 85: Measuring equipment for electrical and electromagnetic quantities. All terms defined in Clause 3 are italicized in this standard. The text of this standard is based on the following
39、 documents: FDIS Report on voting 85/490/FDIS 85/507/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. IEC 62792:2015 IEC 2015 5
40、The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revi
41、sed edition, or amended. 6 IEC 62792:2015 IEC 2015 INTRODUCTION Manufacturers, medical researchers, policy makers, users, and other interested parties involved with different aspects of electroshock weapons (ESWs) use a variety of different measurement methods, different terminologies, and different
42、 parameters to measure and describe the performance of an ESW. These differences generate confusion and misunderstanding within this stakeholder community, and this impacts the ability to perform accurate, reliable, and reproducible measurement comparisons. By developing a generally- accepted termin
43、ology, set of performance parameters, and test methods, this standard will facilitate accurate and precise communication for the parameters that describe the electrical output, current and high voltage, of ESWs. This improved communication will aid this stakeholder community in collectively developi
44、ng uniform methods for describing the ESW output and its effect on human physiology consistently and accurately, thereby enabling the development of safe use performance standards/regulations by the appropriate standardization body. IEC 62792:2015 IEC 2015 7 MEASUREMENT METHOD FOR THE OUTPUT OF ELEC
45、TROSHOCK WEAPONS 1 Scope This International Standard specifies a method for measuring the electrical outputs, current and voltage, from electroshock weapons (ESWs) that deliver an electrical stimulus to humans. This International Standard is applicable to any and all ESWs. 2 Normative references The
46、 following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60469:
47、2013, Transitions, pulses and related waveforms Terms, definitions and algorithms IEEE Std. 1057-2007, IEEE Standard for digitizing waveform recorders BIPM, The International System of Units (SI), 8th Edition, 2006 3 Terms and definitions For the purposes of this document, the following terms and de
48、finitions apply. 3.1 impulse amplitude difference between the specified level corresponding to the maximum peak (minimum peak) of the positive (negative) impulse-like waveform and the level of the state preceding the first transition of that impulse-like waveform SOURCE: IEC 60469:2013, 3.2.3.1 3.2
49、correction operation combining the results of the conversion operation with the transfer function information to yield a waveform that is a more accurate representation of the signal Note 1 to entry: Correction may be effected by a manual process by an operator, a computational process, or a compensating device or apparatus. Correction must be performed to an accuracy that is consistent with the overall accuracy desired in the
