C0018400_317 Cylindrical gears for general and heavy engineering-Standard basic rack tooth profile《一般机械及重机械用圆柱齿轮─标准基准齿条齿廓》.pdf

相关资源

JB T 9050.2-1999 圆柱齿轮减速器 接触斑点测定方法.pdf

JB T 9050.3-1999 圆柱齿轮减速器 加载试验方法.pdf

CB- 3299-1987 船舶渐开线圆柱齿轮承载能力计算方法.pdf

HG T 3139.12-2001 釜用立式减速机 KJ系列可移式圆柱齿轮减速机.pdf

HG T 3139.3-2001 釜用立式减速机 LC系列圆柱齿轮减速机.pdf

JB T 3989.5-2014 渐开线圆柱齿轮磨齿机 第5部分：大平面砂轮磨齿机 精度检验.pdf

FZ T 90032-1992 纺织机械渐开线圆柱齿轮精度.pdf

FZ T 90047-1993 圆柱齿轮结构型式及尺寸.pdf

FZ T 90077-1995 纺织机械渐开线圆柱齿轮承载能力简化计算方法.pdf

FZ T 91018-1996 纺织机械渐开线圆柱齿轮加工工艺规范.pdf

猜你喜欢

REG NASA-TM-72863-1979 Stability and control derivative estimates obtained from flight data for the Beech 99 aircraft.pdf

REG NASA-TM-X-1785-1969 Jet effects on boattail pressure drag of isolated ejector nozzles at Mach numbers from 0 60 to 1 47.pdf

REG NASA-TM-X-1960-1970 Jet effects on the boattail axial force of conical afterbodies at subsonic and transonic speeds.pdf

REG NASA-TM-X-57779-1966 Meeting on Ground Wind Load Problems in Relation to Launch Vehicles.pdf

REG NASA-TM-X-62197-1973 Wind-tunnel investigation of a large-scale 25 degrees swept-wing jet transport model with an external blowing triple-slotted flap.pdf

REG NASA-TM-X-71627-1974 Interim prediction method for low frequency core engine noise.pdf

REG NASA-TM-X-71763-1975 Interim prediction method for fan and compressor source noise.pdf

REG NASA-TM-X-72078-1973 Characteristics of Coupled Nongray Radiating Gas Flows with Ablation Product Effects About Blunt Bodies During Planetary Entries.pdf

REG NASA-TM-X-72697-1975 Low-speed aerodynamic characteristics of a 13-percent-thick airfoil section designed for general aviation applications.pdf