ANS 19 3 4-2002 The Determination of Thermal Energy Deposition Rates in Nuclear Reactors《核反应堆热能沉淀率的测定》.pdf

相关资源

EJ T 567-1991 核反应堆仪表术语.pdf

GB T 13628-1992 核反应堆保护系统用于非安全目的准则.pdf

GB 7163-1987 核反应堆保护系统的可靠性分析要求.pdf

GB T 5203-1985 核反应堆安全逻辑装置 特性和检验方法.pdf

GB T 5203-2011 核反应堆安全逻辑装置特性和检验方法.pdf

GB T 4083-1983 核反应堆保护系统安全准则.pdf

GB T 7164-2004 用于核反应堆的辐射探测器 特性及其测试方法.pdf

GB T 5203-2011 核反应堆安全逻辑装置特性和检验方法.pdf

EJ T 1014-2005 核反应堆稳态中子反应率分布和反应性的确定.pdf

GB T 4083-2005 核反应堆保护系统安全准则.pdf

猜你喜欢

ASTM F2495-2005 Standard Test Method for Determining Energy Consumption of MFDs with Copying Capability and Similar Office Imaging Equipment《有复印能力的MFDs和类似的办公成像设备的能量消耗测定的标准试验方法》.pdf

ASTM F2495-2005(2011) Standard Test Method for Determining Energy Consumption of MFDs with Copying Capability and Similar Office Imaging Equipment《测定有复印能力的多功能显示器和类似的办公成像设备能量消耗的标准试验.pdf

ASTM F2496-2005 Standard Practice for Determining the Scratch Hardness and Scrape Adhesion of Prints and Coatings《测定印刷品和覆层的划痕硬度和擦痕粘性的标准实施规程》.pdf

ASTM F2496-2005(2011)e1 Standard Practice for Determining the Scratch Hardness and Scrape Adhesion of Prints and Coatings《测定印刷品和覆层的划痕硬度和擦痕粘性的标准操作规程》.pdf

ASTM F2497-2005 Standard Practice for Abrasion and Scuff Resistance of Inkjet Media by the Sutherland Rub Tester《用苏瑟兰德(Sutherland)磨损试验仪测定喷墨介质耐磨耗和耐磨损性的标准实施规程》.pdf

ASTM F2497-2005(2011)e1 Standard Practice for Abrasion and Scuff Resistance of Inkjet Media by the Sutherland Rub Tester《用油墨耐擦性试验机测定喷墨介质附着力和耐划痕性的规程》.pdf

ASTM F2498-2005 Standard Practice for Determining the Drying Time of Inkjet Media and Inks Using a Smudge Method《用烟熏法测定喷墨介质和墨水的干燥时间的标准实施规程》.pdf

ASTM F2498-2005(2011) Standard Practice for Determining the Drying Time of Inkjet Media and Inks Using a Smudge Method《运用污迹法测定喷墨介质和墨水干燥时间的标准操作规程》.pdf

ASTM F2502-2005 Standard Specification and Test Methods for Bioabsorbable Plates and Screws for Internal Fixation Implants《内部安装植入物用生物可吸收板和螺钉的标准规范和试验方法》.pdf