HB 20094.4-2012 Test method for determination of wear metals in operating liquid for aviation.Part 4 Scanning electron microscopy and energy dispersive spectrom.pdf

相关资源

HB_Z 413-2013(2017) 民用飞机结构耐久性设计准则.pdf

HB_Z 422-2014(2017) 民用飞机综合模块化航空电子系统开发与认证指南.pdf

HB_Z 407.1-2013(2017) 铝合金零件压弯成形与校形工艺 第1部分：壁板类零件.pdf

HB_Z 410-2013(2017) 树脂基复合材料制件修补工艺.pdf

HB_Z 421-2014(2017) 民用飞机机载系统和设备软件合格审定保证指南.pdf

HB_Z 416-2014(2017) 航空铝合金构件搅拌摩擦焊工艺.pdf

HB_Z 409-2013(2017) 树脂基复合材料制件机械加工工艺.pdf

HB_Z 414-2014(2017) 民用飞机供电管理通用指南.pdf

HB_Z 419-2017 民用飞机用钛及钛合金热处理工艺.pdf

HB 9114-2012(2017) 航空企业直接发货指南.pdf

猜你喜欢

NASA-TM-4549-1994 Effect of passive venting on static pressure distributions in cavities at subsonic and transonic speeds《被动排气对亚音速和跨音速下空腔中静态压力分布的影响》.pdf

NASA-TM-4611-1995 Measurements of store forces and moments and cavity pressures for a generic store in and near a box cavity at subsonic and transonic speeds《在亚音速和跨音速下 在箱子空腔内或附近一般储.pdf

NASA-TM-73726-1977 Two phase choke flow in tubes with very large L D《L D极大管中的二相阻流》.pdf

NASA-TM-76710-1982 Influence of the Reynolds number on the normal forces of slender bodies of revolution《雷诺数对细长回转体正交力的影响》.pdf

NASA-TM-78650-1978 Wind-tunnel results for an improved 21-percent-thick low-speed airfoil section《改良型21%厚度低速翼剖面的风洞结果》.pdf

NASA-TM-78678-1978 Airplane stability calculations with a card programmable pocket calculator《带有卡片可编程且便携式计算器的飞机稳定性计算》.pdf

NASA-TM-78709-1979 NASA low-and medium-speed airfoil development《NASA低速和中速机翼的发展》.pdf

NASA-TM-81470-1980 An improved prediction method for the noise generated in flight by circular jets《通过圆形喷气式飞机对飞行中产生噪声的改善预测方法》.pdf

NASA-TM-81745-1981 Low and high speed propellers for general aviation - Performance potential and recent wind tunnel test results《通用航空的高速和低速螺旋桨 性能潜能和最新风洞试验结果》.pdf