HB 8209-2002 Flared type asymmetric E type union tee reducer extender with swivel nut (8209)《扩口式带收紧螺母不对称E型变径三通管接头(8209)》.pdf

相关资源

HB 8173～HB 8176-2002 扩口式带收紧螺母变径直通管接头.pdf

HB 8177～HB 8180-2002 扩口式带收紧螺母直角管接头.pdf

HB 8181～HB 8184-2002 扩口式带收紧螺母弯管接头.pdf

HB 8201～HB 8204-2002 扩口式带收紧螺母对称变径三通管接头.pdf

HB 8205～HB 8208-2002 扩口式带收紧螺母不对称D型变径三通管接头.pdf

HB 8209～HB 8212-2002 扩口式带收紧螺母不对称E型变径三通管接头.pdf

HB 8213～HB 8216-2002 扩口式带收紧螺母不对称F型变径三通管接头.pdf

HB 4-6-2002 扩口式带凸缘直通管接头.pdf

HB 8217～HB 8220-2002 扩口式带收紧螺母四通管接头.pdf

HB 8185～HB 8188-2002 扩口式带收紧螺母变径直角管接头.pdf

猜你喜欢

FORD WSF-M4D809-A-2010 POLYBUTYLENE TEREPHTHALATE (PBT) 20% PTFE POWDER FILLED EXTRUSION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《20%聚四氟乙烯(PTFE)粉末填充的聚对苯二甲酸丁二醇酯(PBT)挤.pdf

FORD WSF-M4D846-A-2010 POLYAMIDE 46 (PA46) HEAT STABILIZED 40% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《受热稳定的40%玻璃纤维增强的聚酰胺46(PA46)成型料 与标准FORD.pdf

FORD WSF-M4D881-A-2008 ABS MOLDING COMPOUND CLEAR INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《丙烯腈-丁二烯-苯乙烯透明模塑料 内部用(和FORD WSS-M99P1111-A一起使用)(使用 FORD WSK-M4D827-A FORD WSK-M4D82.pdf

FORD WSF-M4D897-A-2010 POLYAMIDE 46 (PA46) HEAT STABILIZED 50% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《受热稳定的50%玻璃纤维增强的聚酰胺46(PA46)成型料 与标准FORD.pdf

FORD WSF-M4D907-A-2010 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚亚苯基乙醚+聚酰胺混.pdf

FORD WSF-M4G351-A-2008 SEALANT SILICONE RUBBER ULTRAVIOLET AND MOISTURE CURED TO BE USED WITH FORD WSS-M99P1111-A 《紫外线和湿态固化硅橡胶密封剂(于FORD WSS-M99P1111-A一起使用)》.pdf

FORD WSF-M4G351-A2-2014 SEALANT SILICONE RUBBER ULTRAVIOLET AND MOISTURE CURED TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSF-M4G353-A1-1995 SEALANT SILICONE RUBBER ONE COMPONENT MEHOXY CURED BLACK《甲氧基固化型黑色单组分硅橡胶密封剂》.pdf

FORD WSF-M4G356-A-1994 SEALANT SILICONE RUBBER TWO COMPONENT LOW VISCOSITY FORM IN PLACE《现场成型低粘度两组分硅橡胶密封剂》.pdf