HB 8326-2013 Tube assemblies of 74° cone connection for engine《发动机用74°锥面管路连接组合导管》.pdf

相关资源

HB_Z 413-2013(2017) 民用飞机结构耐久性设计准则.pdf

HB_Z 422-2014(2017) 民用飞机综合模块化航空电子系统开发与认证指南.pdf

HB_Z 407.1-2013(2017) 铝合金零件压弯成形与校形工艺 第1部分：壁板类零件.pdf

HB_Z 410-2013(2017) 树脂基复合材料制件修补工艺.pdf

HB_Z 421-2014(2017) 民用飞机机载系统和设备软件合格审定保证指南.pdf

HB_Z 416-2014(2017) 航空铝合金构件搅拌摩擦焊工艺.pdf

HB_Z 409-2013(2017) 树脂基复合材料制件机械加工工艺.pdf

HB_Z 414-2014(2017) 民用飞机供电管理通用指南.pdf

HB_Z 419-2017 民用飞机用钛及钛合金热处理工艺.pdf

HB 9114-2012(2017) 航空企业直接发货指南.pdf

猜你喜欢

FORD WSS-M4D713-A8-2007 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 5% WOLLASTONITE FILLED COLOR PIGMENTED UV STABILIZED EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用对紫外线稳定的着色.pdf

FORD WSS-M4D713-A9-2008 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 12% GLASS FILLED COLOR PIGMENTED UV STABILIZED EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《室外用12%玻璃充填着色 具有紫外线稳定.pdf

FORD WSS-M4D716-B1-2016 POLYETHERIMIDE (PEI) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D719-A2-2006 POLYAMIDE (PA) 66 38% GLASS FIBER MINERAL REINFORCED MOLDING COMPOUND 25% POST CONSUMER MINERAL FILLED NYLON TO BE USED WITH FORD WSS-M99P1111-A (Shown on.pdf

FORD WSS-M4D719-A3-2007 POLYAMIDE (PA) 66 40% MINERAL REINFORCED MOLDING COMPOUND HEAT STABILIZED 25% POST CONSUMER CONTENT - TO BE USED WITH FORD WSS-M99P1111-A 《25%消费后回收、受热稳定的4.pdf

FORD WSS-M4D725-B1-2012 POLYBUTYLENE TEREPHTHALATE (PBT) 30% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D726-A3-2010 POLYETHYLENE TEREPHTHALATE (PET) 30% GLASS FIBER REINFORCED POST CONSUMER RECYCLATE MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《30%玻璃纤维增强的聚对苯二甲酸.pdf

FORD WSS-M4D729-A3-2006 POLYPROPYLENE (PP) HOMOPOLYMER 20% TALC FILLED INJECTION MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用20%滑石粉填充的聚丙烯(PP)注塑成型料 与标准FOR.pdf

FORD WSS-M4D729-A4-2000 POLYPROPYLENE (PP) HOMOPOLYMER 20 % TALC FILLED INJECTION MOLDING COMPOUND EXTERIOR《汽车外部用20%滑石粉填充的聚丙烯（PP）均聚物注塑成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf