HB 8363-2013 Bolt reduced hexagon-head with head hole thread tolerance 6e mid thread 1Cr17Ni2《1Cr17Ni2螺纹公差带6e头部1个保险丝孔中螺纹小六角头螺栓》.pdf

相关资源

HB_Z 413-2013(2017) 民用飞机结构耐久性设计准则.pdf

HB_Z 422-2014(2017) 民用飞机综合模块化航空电子系统开发与认证指南.pdf

HB_Z 407.1-2013(2017) 铝合金零件压弯成形与校形工艺 第1部分：壁板类零件.pdf

HB_Z 410-2013(2017) 树脂基复合材料制件修补工艺.pdf

HB_Z 421-2014(2017) 民用飞机机载系统和设备软件合格审定保证指南.pdf

HB_Z 416-2014(2017) 航空铝合金构件搅拌摩擦焊工艺.pdf

HB_Z 409-2013(2017) 树脂基复合材料制件机械加工工艺.pdf

HB_Z 414-2014(2017) 民用飞机供电管理通用指南.pdf

HB_Z 419-2017 民用飞机用钛及钛合金热处理工艺.pdf

HB 9114-2012(2017) 航空企业直接发货指南.pdf

猜你喜欢

GOST 7897-1983 Deciduous timber blanks Specifications《落叶型木材坯料 规范》.pdf

GOST 790-1989 Hard laundry soap and toilet soap Acceptance rules and test methods of measurements《硬质洗涤皂及香皂 测量验收准则及测试方法》.pdf

GOST 792-1967 Low-carbon wire of quality Specifications《优质低碳钢丝 技术条件》.pdf

GOST 7975-2013 Fresh food pumpkin Specification《新鲜食物南瓜 规格》.pdf

GOST 799-1973 Fishplate bolts for broad gauge General requirements《宽轨鱼尾板 一般要求》.pdf

GOST 8 003-2010 State system for ensuring the uniformity of measurements Tool-making microscopes Verification procedure《国家测量一致性体系 工具制作显微镜 核查程序》.pdf

GOST 8 005-2002 State system for ensuring the uniformity of measurements Continuous conveyer balance Methods and means of verification《ГСИ 连续作用皮带秤 检定方法》.pdf

GOST 8 006-1971 State system for ensuring the uniformity of measurements Phase-sensitive voltmeters Methods and means for verification《ГСИ 相敏伏特计 检定方法与工具》.pdf

GOST 8 008-1972 State system for ensuring the uniformity of measurements Methods and means for verification of indicating and recording pneumatic control instruments《ГСИ ГСИ型气动指示式和.pdf