HB 8446-2014 General requirements of mock-up for civil aircraft《民用飞机样机通用要求》.pdf

相关资源

HB 8717-2024 飞机燃油系统机上地面试验要求.pdf

HB 8710-2024 飞机试飞实时监控系统通用要求.pdf

HB 8709-2024 飞机试飞放飞要求.pdf

HB 8712-2024 飞机侧风起降飞行试验要求.pdf

HB 8715-2024 飞机空中最小操纵速度飞行试验要求.pdf

HB 8711-2024 飞机防火系统飞行试验要求.pdf

HB 8716-2024 飞机溅水试验要求.pdf

HB Z 324-2024 运输类飞机重量与平衡设计要求.pdf

HB 8713-2024 飞机地面应急撤离试验要求.pdf

HB 8714-2024 飞机空速系统校准飞行试验要求.pdf

猜你喜欢

FORD ESK-M2G340-A-2015 ADHESIVE POLYCHLOROPRENE CONTACT WATER DISPERSION AIR DRYING TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESK-M2G365-A1-2015 ADHESIVE POLYURETHANE TWO COMPONENT SOLVENT FREE METAL TO E-COATED METAL POLYOL PART TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESK-M2G365-A2-2015 ADHESIVE POLYURETHANE TWO COMPONENT SOLVENT FREE METAL TO E-COATED METAL ISOCYANATE COMPONENT TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESK-M2G367-A1-2015 ADHESIVE POLYURETHANE TWO COMPONENT WATER BORNE BASE MATERIAL TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESK-M2G367-A2-2015 ADHESIVE POLYURETHANE TWO COMPONENT WATER BORNE HARDENER TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD ESK-M2G367-A1).pdf

FORD ESK-M2J221-A-2012 ENAMEL DECORATIVE BAKING EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESK-M32J127-A-1993 PAINT NON METALLIC SOLVENT BORNE FOR BASECOAT CLEARCOAT SYSTEM BAKING EXTERIOR TOPCOAT《外部面漆用底涂层 透明涂层系统用溶剂基非金属油漆》.pdf

FORD ESK-M3D150-A-2005 PHENOLIC INJECTION MOLDING COMPOUND 43% GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A 《43%玻璃纤维增强的酚醛树脂注塑成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESK-M3D151-A-2005 PHENOLIC MOLDING COMPOUND 40% E-GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A 《40%E型玻璃纤维增强酚醛树脂成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf