HB Z 20012-2011 Fillet rolling process of bolt《螺栓滚压强化工艺》.pdf

相关资源

HB_Z 413-2013(2017) 民用飞机结构耐久性设计准则.pdf

HB_Z 422-2014(2017) 民用飞机综合模块化航空电子系统开发与认证指南.pdf

HB_Z 407.1-2013(2017) 铝合金零件压弯成形与校形工艺 第1部分：壁板类零件.pdf

HB_Z 410-2013(2017) 树脂基复合材料制件修补工艺.pdf

HB_Z 421-2014(2017) 民用飞机机载系统和设备软件合格审定保证指南.pdf

HB_Z 416-2014(2017) 航空铝合金构件搅拌摩擦焊工艺.pdf

HB_Z 409-2013(2017) 树脂基复合材料制件机械加工工艺.pdf

HB_Z 414-2014(2017) 民用飞机供电管理通用指南.pdf

HB_Z 419-2017 民用飞机用钛及钛合金热处理工艺.pdf

HB 9114-2012(2017) 航空企业直接发货指南.pdf

猜你喜欢

ASTM C1278 C1278M-2007a(2015) Standard Specification for Fiber-Reinforced Gypsum Panel《纤维增强石膏板的标准规格》.pdf

ASTM C1278 C1278M-2017 Standard Specification for Fiber-Reinforced Gypsum Panel《纤维增强石膏板的标准规格》.pdf

ASTM C1279-2005 Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed Heat-Strengthened and Fully Tempered Flat Glass《在退火、淬火和全回.pdf

ASTM C1279-2009 Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed Heat-Strengthened and Fully Tempered Flat Glass《在退火、淬火和全回.pdf

ASTM C1279-2013 Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed Heat-Strengthened and Fully Tempered Flat Glass《在退火、淬火和全回.pdf

ASTM C128-2007a Standard Test Method for Density Relative Density (Specific Gravity) and Absorption of Fine Aggregate《密度、相对密度(比重)、和细集料吸收性的标准试验方法》.pdf

ASTM C128-2012 Standard Test Method for Density Relative Density (Specific Gravity) and Absorption of Fine Aggregate《细集料的密度 相对密度(比重) 吸收性的标准试验方法》.pdf

ASTM C128-2015 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate《细骨料相对密度 (比重) 和吸收的标准试验方法》.pdf

ASTM C1280-2004 Standard Specification for Application of Gypsum Sheathing《石膏外保护壳应用的标准规范》.pdf