1、 Reference number ISO/IEC 15897:2011(E) ISO/IEC 2011INTERNATIONAL STANDARD ISO/IEC 15897 Second edition 2011-10-01 Information technology User interfaces Procedures for the registration of cultural elements Technologies de linformation Interfaces utilisateur Procdures pour lenregistrement des lments
2、 culturels ISO/IEC 15897:2011(E) COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2011 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in wri
3、ting from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO/IEC 2011 All rights reservedISO/I
4、EC 15897:2011(E) ISO/IEC 2011 All rights reserved iiiContents Page Foreword . v Introduction vi 1 Scope 1 2 Normative references 1 3 Terms and definitions . 2 4 International Register 3 4.1 Content . 3 4.2 Format. 3 4.3 Indices to the registrations 3 4.4 Identification of an approved registration 4
5、4.5 No modification nor deletion of registrations 4 5 ISO/IEC supervisory body 4 6 Registration Authority . 4 6.1 Appointment 4 6.2 Responsibilities . 5 6.3 Identity 5 7 Sponsoring Authority 6 7.1 Identity 6 7.2 Responsibilities . 6 8 Source of Information . 7 8.1 Identity 7 8.2 Responsibilities . 7
6、 9 The Registration Authoritys Joint Advisory Committee 7 9.1 Membership . 7 9.2 Appointment 7 9.3 Responsibilities . 7 10 Types and relationships of Cultural Specifications . 8 10.1 Types of Cultural Specifications 8 10.2 Relations between registration types 8 11 Format of a Narrative Cultural Spec
7、ification 9 12 Contents of a Narrative Cultural Specification (informative) 11 12.1 Mandatory clauses 11 12.2 Optional clauses 12 13 Format of a Repertoiremap 15 14 Rules for Cultural Specifications . 15 15 Specification of the token identifier 17 16 Initial registration procedures 18 17 Processing
8、of an approved application 19 18 Appeal procedures 20 18.1 Appeals against rejection . 20 18.2 Appeals against registration 20 18.3 Invalid reasons for an appeal . 20 18.4 Procedure for filing an appeal 20 ISO/IEC 15897:2011(E) iv ISO/IEC 2011 All rights reserved18.5 Resolution of an appeal 20 19 Re
9、visions 21 20 Additions of token identifiers to an existing registration 21 21 Withdrawal 21 21.1 Withdrawal of an application for registration .21 21.2 Withdrawal of an entire existing registration 21 21.3 Procedures for parts .22 Annex A (normative) Application form for a Cultural Specification 23
10、 Annex B (informative) Sample application for a Cultural Specification 24 Annex C (normative) External references to Cultural Specifications 25 Annex D (informative) Example of a Narrative Cultural Specification .26 Annex E (normative) “reorder-after“ construct in LC_COLLATE 35 Annex F (informative)
11、 Information on “reorder-after“ construct in LC-COLLATE .37 Annex G (informative) Sample POSIX Locale specification for Danish .39 Annex H (informative) Differences from ISO/IEC 15897:1999 and CEN ENV 12005:1996 42 Bibliography 44 ISO/IEC 15897:2011(E) ISO/IEC 2011 All rights reserved vForeword ISO
12、the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committee
13、s established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work.
14、 In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Stand
15、ards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the element
16、s of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. ISO/IEC 15897 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 35, User interfaces. This second edition can
17、cels and replaces the first edition (ISO/IEC 15897:1999), which has been technically revised. ISO/IEC 15897:1999 was the result of a “fast-track” adoption of ENV 12005:1996. This second edition adds support for registering specifications meant for machine processing, such as ISO/IEC TR 14652 specifi
18、cations, SGML and XML. It enlarges the group of organizations that may be Sponsoring Authorities, and an effort has been made to align it with the registration procedures of ISO/IEC 2375. The changes to the first edition are outlined in Annex H. ISO/IEC 15897:2011(E) vi ISO/IEC 2011 All rights reser
19、vedIntroduction Cultural differences throughout the world make it necessary to adapt IT equipment to each local culture. Standard methods being developed by ISO/IEC JTC 1/SC 35 make such adaptation easier. Registering the local conventions in a globally available registry makes it still easier. CEN/
20、TC 304 was the first committee to start work on such a registry and the European prestandard ENV 12005:1996 was the result. ISO/IEC 15897:1999 was the result of the “fast-track” adoption of DS/ENV 12005, a Danish Standards Association standard publication equivalent to ENV 12005. This International
21、Standard registers amongst other items Narrative Cultural Specifications and Repertoiremaps, POSIX Locales and POSIX Charmaps as defined in ISO/IEC/IEEE 9945, and other machine- parsable Cultural Specifications such as ISO/IEC TR 14652 FDCC-sets, Charmaps and Repertoiremaps, and Cultural Specificati
22、ons in SGML or XML. The registration will be free-of-charge and the registered cultural elements will also be freely available on the Internet (see 6.3). This will make information on cultural conventions freely and easily available to producers in the IT market. Some of these specifications may eve
23、n be applied without any change by downloading the formatted specifications and processing them, for example by POSIX-compliant software. INTERNATIONAL STANDARD ISO/IEC 15897:2011(E) ISO/IEC 2011 All rights reserved 1Information technology User interfaces Procedures for the registration of cultural
24、elements 1 Scope This International Standard specifies the information that can appear in a Cultural Specification and defines the procedures for registering such specifications. The Cultural Specifications can include freeform Narrative Cultural Specifications and Repertoiremaps as described in thi
25、s International Standard, POSIX Locales and Charmaps conforming to ISO/IEC/IEEE 9945, and other machine-parsable specifications such as FDCC-sets, Repertoiremaps and Charmaps following the recommendations of ISO/IEC TR 14652, and Cultural Specifications formatted using SGML or XML. The registry is i
26、n printed and electronic form. Each cultural convention registration has unique identifiers in a particular standard format defined in this International Standard. A numeric identifier and a token identifier are assigned to each registered cultural convention specification, POSIX Locale, POSIX Charm
27、ap and Repertoiremap, FDCC-set and ISO/IEC TR 14652 Charmap, and other machine-processable descriptions of cultural conventions. These identifiers are for unique identification of the Cultural Specification, and are intended to be used with POSIX Locale handling mechanisms and possibly other Locale
28、and Charmap usage, such as in programming languages, database handling and communication protocols and for identification and specification by human operators. The field of application of this International Standard is to provide reference for implementers, procurers, users, and standardization orga
29、nizations to determine cultural requirements in a given cultural environment. Registered items using certain POSIX formal specification methods can also be used by POSIX-conformant operating systems and other software capable of using such specifications. NOTE The title of this International Standar
30、d contains the term “cultural elements”. The preferred term in this International Standard is “cultural conventions”, but the term “cultural elements” is retained in the title for consistency with earlier versions of this International Standard. 2 Normative references The following referenced docume
31、nts are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 639-1, Codes for the representation of names of languages Part 1: Alpha-2 co
32、de ISO 639-2, Codes for the representation of names of languages Part 2: Alpha-3 code ISO/IEC 646, Information technology ISO 7-bit coded character set for information interchange ISO 3166 (all parts), Codes for the representation of names of countries and their subdivisions ISO 4217, Codes for the
33、representation of currencies and funds ISO 8601, Data elements and interchange formats Information interchange Representation of dates and times ISO/IEC 15897:2011(E) 2 ISO/IEC 2011 All rights reservedISO/IEC 8824 (all parts), Information technology Abstract Syntax Notation One (ASN.1) ISO/IEC 8825
34、all parts), Information technology ASN.1 encoding rules ISO/IEC/IEEE 9945, Information technology Portable Operating System Interface (POSIX ) Base Specifications, Issue 7 ISO/IEC 10646, Information technology Universal Multiple-Octet Coded Character Set (UCS) 3 Terms and definitions For the purpos
35、es of this document, the following terms and definitions apply. 3.1 Locale definition of the subset of a users environment that depends on language and cultural conventions NOTE See Clause 7 of ISO/IEC 9945-1:2003 for a specification of the Locale file format. 3.2 FDCC-set set of Formal Definitions
36、of Cultural Conventions definition of the subset of a users information technology environment that depends on language, territory, or other cultural customs NOTE See Clause 4 of ISO/IEC TR 14652:2004 for a specification of the FDCC-set format. 3.3 Charmap text file describing a coded character set
37、NOTE See 6.4 of ISO/IEC 9945-1:2003 for a description of the POSIX Charmap file format. 3.4 text file human-readable file that contains characters organized into one or more lines 3.5 cultural convention cultural element data item for computer use that may vary depending on language, territory, or o
38、ther cultural circumstances 3.6 Cultural Specification Narrative Cultural Specification, POSIX Locale, FDCC-set, POSIX Charmap, Repertoiremap, or other machine-processable description of cultural conventions such as ISO/IEC TR 14652 FDCC-sets, Charmaps or Repertoiremaps, or Cultural Specifications i
39、n SGML or XML 3.7 Narrative Cultural Specification narrative description of culturally dependent information pertaining to information technology NOTE Such information may be useful when designing computer systems and software. See Clauses 10, 11 and 12. ISO/IEC 15897:2011(E) ISO/IEC 2011 All rights
40、 reserved 33.8 Repertoiremap definition of a mapping between character names and characters for the repertoire of characters used in a Locale NOTE This is further described in Clause 13. 3.9 profile of a standard set of specifications of values of parameters in the standard, selections of optional i
41、tems of the standard, or the recommendations concerning implementation-related matters of the standard 3.10 token identifier string uniquely identifying the Cultural Specification, constructed from various key attributes of the specification NOTE This is further described in Clause 15. 4 Internation
42、al Register 4.1 Content The International Register of Cultural Specifications (ISO-IR-15897) shall consist of two parts: a set of registrations of Cultural Specifications, and indices to the registrations. 4.2 Format The International Register (IR) shall be available in electronic format through the
43、 Internet, and optionally on other electronic media. It may also be made available on paper. Directions for access to the International Register on the Internet are given in 6.3. 4.3 Indices to the registrations The International Register shall contain indices to the registrations by: the registrati
44、on number; the token identifiers; the type of Cultural Specification(s) in a registration; the culture to which a registration applies; the sponsoring authority of a registration; other indices as deemed appropriate by the Registration Authority, or as requested by the subcommittee with administrati
45、ve responsibility for this International Standard (see Clause 5, ISO/IEC Supervisory Body). ISO/IEC 15897:2011(E) 4 ISO/IEC 2011 All rights reserved4.4 Identification of an approved registration Each approved registration must have a unique registration number and one or more unique token identifier
46、s. 4.4.1 Structure of the identifiers The structure of a registration number is one or more digits, without leading zeroes. The structure of a token identifier is given in Clause 15. 4.4.2 Reference to an approved registration A reference to an approved registration should be made by using one of it
47、s unique token identifiers, a part of its token identifier with for example part or all of the version number excluded as described in Clause 15, or the prefix ISO-IR-15897 followed by a HYPHEN and the registration number, or one of the mechanisms listed in Annex C. Examples of token identifiers are
48、 listed in Clause 14. An example of using the ISO-IR-15897 prefix with the registration number 37 is ISO-IR-15897-37. 4.5 No modification nor deletion of registrations The contents of an individual registration shall never be changed or deleted once the application for registration has been approved
49、 (except for name additions). Even the correction of editorial errors will make a new registration necessary. This is contrasted with a standard which must be reviewed and/or revised periodically. If an existing entry in the registry is based on a standard that subsequently is revised, the existing registry entry is not changed. If a Sponsoring Authority desires recognition of such a revision, a new registration shall be made by following the normal procedures. Withdrawal of part of an existing reg
