JIS G 5111-1991 High tensile strength carbon steel castings and low alloy steel castings for structural purposes《结构用高抗拉强度碳素钢及低合金钢铸件》.pdf

相关资源

JIS G5111-1991 结构用高抗拉强度碳素钢及低合金钢铸件.pdf

JIS G5111-1991 英文版 结构用高抗拉强度碳素钢及低合金钢铸件.pdf

JIS K6251-2004 硫化橡胶和热塑性橡胶 抗拉强度测定.pdf

JIS K6400-5-2004 挠性多孔聚合材料.物理性能的测定.第5部分 抗拉强度、断裂时的伸长率和撕裂强度.pdf

NASM 1312-8-1997 紧固件试验方法8 抗拉强度.pdf

HG T 2378-1992 石墨粘接剂粘接抗拉强度试验方法.pdf

JB T 7424-2007 涂附磨具 抗拉强度和伸长率测定方法.pdf

HB 5475-1991 热喷涂涂层抗拉强度试验方法.pdf

MT 47-1987 煤和岩石单向抗拉强度测定方法.pdf

HB 6852-1993 螺栓最小抗拉强度为1075MPa用预载垫圈.pdf

猜你喜欢

ASTM F1796-1997(2002) Standard Specification for High Voltage Detectors&8212 Part 1 Capacitive Type to be Used for Voltages Exceeding 600 Volts AC《高压探测器用标准规范 第1部分 超过600伏交流电压用电容式探测器.pdf

ASTM F1796-2009 Standard Specification for High Voltage Detectors&8212 Part 1 Capacitive Type to be Used for Voltages Exceeding 600 Volts AC《第1部分 超过600伏交流电压用电容式探测器的标准规范》.pdf

ASTM F1796-2009(2014) Standard Specification for High Voltage DetectorsPart 1 Capacitive Type to be Used for Voltages Exceeding 600 Volts AC《高压检测器的标准规格 第1部分 超过600 V交流电压用电容式》.pdf

ASTM F1797-1998(2003) Standard Test Method for Acoustic Emission Testing of Insulated Digger Derricks《绝缘采掘式起重机声音发射试验的标准试验方法》.pdf

ASTM F1797-2009 Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Digger Derricks.pdf

ASTM F1797-2009e1 Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Digger Derricks《绝缘采掘式起重机声音发射试验的标准试验方法》.pdf

ASTM F1797-2014 Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Digger Derricks《隔热和非隔热挖掘机吊杆声发射试验的标准试验方法》.pdf

ASTM F1797-2015 Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Digger Derricks《隔音和不隔音挖掘机吊杆声发射试验的标准试验方法》.pdf

ASTM F1797-2018 Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Digger Derricks《绝缘和非绝缘挖掘井架声发射试验的标准试验方法》.pdf