JIS M 8704-2015 8868 Iron ores -- Determination of the mass and quality characteristic of a lot《铁矿石 大量铁矿石质量和品质特征的测定》.pdf

相关资源

JIS C9901 AMD 1-2018 Methods of calculation and representation of energy efficiency standard achievement percentage of electrical and electronic appliances (Ame.pdf

JIS B8366-1-2018 Fluid power systems and components -- Cylinders 《流体动力系统和元件 液压缸 元件和识别代码 第1部分 缸径和活塞杆.pdf

JIS Z4716-2018 Measurement methods of leakage X-ray from X-ray examination rooms《X射线检查室泄漏X射线的测量方法》.pdf

JIS Z2345-4-2018 Standard test blocks for ultrasonic testing -- Part 4 Standard test blocks for angle beam ultrasonic testing《超声检测用标准试块 第4部分 斜射超声检测用标准试块》.pdf

JIS Z2345-3-2018 Standard test blocks for ultrasonic testing -- Part 3 Standard test blocks for normal ultrasonic testing《超声检测用标准试块 第3部分 普通超声检测用标准试块》.pdf

JIS Z2345-2-2018 Standard test blocks for ultrasonic testing -- Part 2 A7963 Standard Test Block《超声检测用标准试块 第2部分 A7963标准试块》.pdf

JIS Z2345-1-2018 Standard test blocks for ultrasonic testing -- Part 1 A1 Standard Test Block《超声检测用标准试块 第1部分 A1标准试块》.pdf

JIS Z2242-2018 Method for Charpy pendulum impact test of metallic materials《金属材料的摆式冲击试验方法》.pdf

JIS Z0150-2018 Packaging -- Distiribution packaging -- Graphical symbols for handling and storage of packages《包装 畸变包装 包装处理和储存用图形符号》.pdf

JIS X6302-9-2018 Identification cards -- Recording technique -- Part 9 Tactile identifier mark《识别卡 记录技术 第9部分 触式鉴别器标志》.pdf

猜你喜欢

FORD WSB-M4D861-A-2006 POLYPHTHALAMIDE (PPA) 45 % GLASS FIBER REINFORCED HEAT STABILIZED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《45%玻璃纤维增强、受热稳定的聚邻苯二甲酰胺(PPA)成型料 与标准.pdf

FORD WSB-M4D862-A-2006 THERMOPLASTIC POLYURETHANE ELASTOMER (TPUR) 60 D HARDNESS 15 % GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《15%玻璃纤维增强的硬度为60.pdf

FORD WSB-M4D865-A-2010 POLYPROPYLENE (PP) 40% LONG GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《40%长玻璃纤维增强模塑材料聚丙烯(PP) 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSB-M4D865-A2-2010 POLYPROPYLENE (PP) HOMOPOLYMER 50% LONG GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《50%长玻璃纤维增强模塑材料聚丙烯(PP)均聚物 与福特WSS-M99P.pdf

FORD WSB-M4D866-A1-2008 ABS + POLYCARBONATE (ABS+PC) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《丙烯腈-丁二烯-苯乙烯共聚物(ABS)+聚碳酸酯(ABS+PC)成型料 与标准FORD WSS-M99P1111-A一起使用 [使用 FO.pdf

FORD WSB-M4D866-A2-2008 ABS + POLYCARBONATE (ABS+PC) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSB-M4D866-A1)《丙烯腈-丁二烯-苯乙烯共聚物(ABS)+聚碳酸酯(ABS+PC)成型料 与标准FO.pdf

FORD WSB-M4D867-A-2008 ABS + POLYCARBONATE (ABS+PC) 10% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《10%玻璃纤维增强的丙烯腈-丁二烯-苯乙烯共聚物(ABS)+聚碳酸酯混合物(ABS+PC).pdf

FORD WSB-M4D868-A-2010 POLYETHYLENE TEREPHTHALATE (PET) 37% GLASS FIBER REINFORCED MOLDING COMPOUND PAINTABLE TO BE USED WITH FORD WSS-M99P1111-A 《可印刷的37%玻璃纤维增强的聚对苯二甲酸乙二酯(PET)成型料.pdf

FORD WSB-M4D871-A1-2006 POLYVINYL CHLORIDE (PVC) FLEXIBLE 55 A DUROMETER HARDNESS INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《内部用硬度55A的柔性聚氯乙烯(PVC)(和FORD WSS-M99P1111-A一起使用)》.pdf