JIS P 8112-2008 4375 Paper -- Determination of bursting strength《纸张 脆裂强度的测定》.pdf

相关资源

JIS C9901 AMD 1-2018 Methods of calculation and representation of energy efficiency standard achievement percentage of electrical and electronic appliances (Ame.pdf

JIS B8366-1-2018 Fluid power systems and components -- Cylinders 《流体动力系统和元件 液压缸 元件和识别代码 第1部分 缸径和活塞杆.pdf

JIS Z4716-2018 Measurement methods of leakage X-ray from X-ray examination rooms《X射线检查室泄漏X射线的测量方法》.pdf

JIS Z2345-4-2018 Standard test blocks for ultrasonic testing -- Part 4 Standard test blocks for angle beam ultrasonic testing《超声检测用标准试块 第4部分 斜射超声检测用标准试块》.pdf

JIS Z2345-3-2018 Standard test blocks for ultrasonic testing -- Part 3 Standard test blocks for normal ultrasonic testing《超声检测用标准试块 第3部分 普通超声检测用标准试块》.pdf

JIS Z2345-2-2018 Standard test blocks for ultrasonic testing -- Part 2 A7963 Standard Test Block《超声检测用标准试块 第2部分 A7963标准试块》.pdf

JIS Z2345-1-2018 Standard test blocks for ultrasonic testing -- Part 1 A1 Standard Test Block《超声检测用标准试块 第1部分 A1标准试块》.pdf

JIS Z2242-2018 Method for Charpy pendulum impact test of metallic materials《金属材料的摆式冲击试验方法》.pdf

JIS Z0150-2018 Packaging -- Distiribution packaging -- Graphical symbols for handling and storage of packages《包装 畸变包装 包装处理和储存用图形符号》.pdf

JIS X6302-9-2018 Identification cards -- Recording technique -- Part 9 Tactile identifier mark《识别卡 记录技术 第9部分 触式鉴别器标志》.pdf

猜你喜欢

AGMA 98FTM11-1998 Improving Pump Gear Geometry Through Secondary Gear Tooth Finishing《通过二档齿轮齿精整提高泵齿轮的几何精度》.pdf

AGMA 98FTM12-1998 Gear Refurbishment an Economical Approach for Aerospace Overhaul & Repair《齿轮翻新.航空大修和维修的一种经济方法》.pdf

AGMA 98FTM2-1998 Mesh Friction in Gearing《齿轮的啮合摩擦》.pdf

AGMA 98FTM3-1998 Basic Studies on Fatigue Strength of Case-Hardened Gear Steel - Effects of Shot Peening and or Barrelling Processes《渗碳硬化齿轮钢疲劳强度的基本研究.喷丸硬化和 或滚光加工的作用》.pdf

AGMA 98FTM4-1998 Effect of Uncontrolled Heat Treat Distortion on the Pitting Life of Ground Carburized and Hardened Gears《不受控制的热处理变形对于磨光 渗碳和硬化齿轮的点蚀寿命的影响》.pdf

AGMA 98FTM5-1998 Low Vibration Design on a Helical Gear Pair《螺旋齿轮副上的低振动设计》.pdf

AGMA 98FTM6-1998 Calibration of Master Gears on Coordinate Measurement Machines《坐标量测设备上的主齿轮的校准》.pdf

AGMA 98FTM7-1998 Checker of 3D Form Accuracy of Hypoid & Bevel Gear Teeth for the new Generation and Quality Control《新一代和质量控制用准双曲面的和伞形齿轮齿的3D形状精度检查》.pdf

AGMA 98FTM8-1998 New Test Methods for the Evaluation of Wear Scuffing and Pitting Capacity of Gear Lubricants《齿轮润滑剂的磨损 擦伤和点蚀能力评价的新试验方法》.pdf