JB T 13090 1-2017 《数控顺序珩磨机 第1部分 精度检验》.pdf

相关资源

JB T 13090.2-2017 数控顺序珩磨机 第2部分：技术条件.pdf

JB T 13090.1-2017 《数控顺序珩磨机 第1部分 精度检验》.pdf

猜你喜欢

FORD WSB-M4D833-A-2013 ACRYLONITRILE STYRENE ACRYLATE (ASA) MEDIUM HEAT RESISTANT MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M4D834-A-2010 POLYPROPYLENE (PP) 15% GLASS SPHERE REINFORCED HEAT STABILIZED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《15%玻璃珠增强的受热稳定的聚丙烯（PP）成型料 与标准FORD WSS-.pdf

FORD WSB-M4D835-A-2010 POLYARYLSULFONE (PAS) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚芳砜（PAS）成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSB-M4D840-A4-2006 ACETAL (POM) COPOLYMER COLOR PIGMENTED MOLDING COMPOUND MELT FLOW RATE 1 8 - 4 0 INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用熔体流动速率为1 8-4 0的乙缩醛共聚物(.pdf

FORD WSB-M4D841-A-2013 POLYPROPYLENE (PP) COPOLYMER 15% MINERAL FILLED COLOR PIGMENTED INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M4D841-A2-2011 POLYPROPYLENE (PP) COPOLYMER 16% MINERAL FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《16%矿物填充模塑材料聚丙烯(PP)共聚物 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSB-M4D841-A3-2005 POLYPROPYLENE (PP) COPOLYMER 13% TALC FILLED COLOR PIGMENTED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用13%滑石粉填充的着色型聚丙烯(PP)共聚物成型料.pdf

FORD WSB-M4D842-A-2010 POLYPROPYLENE (PP) COPOLYMER 26% MINERAL FILLED COLOR PIGMENTED INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用26%矿物填充的着色型聚丙烯(PP)共聚物成型料 与标准FORD WSS-M9.pdf

FORD WSB-M4D844-A1-2006 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS) MOLDING COMPOUND GENERAL PURPOSE GRADE TO BE USED WITH FORD WSS-M99P1111-A 《通用级聚苯醚+聚苯乙烯混合物成型料 与标准FORD W.pdf