JB T 13162-2017 《低速汽车动力性能要求和试验方法》.pdf

相关资源

JB T20104-2022 片剂硬度仪.pdf

JB T20098-2022 抗生素玻璃瓶液体灌装联动线.pdf

JB T20205-2022 脱气仪.pdf

JB T20206-2022 生物制药反应过程温控装置.pdf

JB T20103-2022 蒸发浓缩器.pdf

JB T20099-2022 药物过滤洗涤干燥机.pdf

JB T20108-2022 药用脉冲式布袋除尘器.pdf

JB T20203-2022 药物溶液颜色测定仪.pdf

JB T20107-2022 药用卧式流化床干燥机.pdf

JB T20204-2022 熔点测定仪.pdf

猜你喜欢

DIN 3586-2003 Thermally activated shutting-off devices for gas - Requirements and testing《燃气设施用热驱动关闭设备 要求和试验》.pdf

DIN 3606-1954 Pipe hoisting caps for casing pipes according to DIN 4918《按DIN 4918钻管用的管子提升滑块》.pdf

DIN 37080-1975 Adjusting Equipment for Brake Blocks Survey and Arrangement《制动器闸瓦的调节装置 概述和配置》.pdf

DIN 37081-1982 Adjusting equipment for brake blocks Brackets Spring plates《制动闸瓦的调节装置 支座、离合器弹性被动片》.pdf

DIN 37082-1975 Adjusting Equipment for Brake Blocks Compression Springs Spring Bolt《制动踢片的调节装置 弹簧螺栓的压力弹簧 》.pdf

DIN 371-2016 Machine taps with reinforced shank for coarse pitch metric ISO-threads M1 to M10 and fine pitch metric ISO-threads M1 × 0 2 to M10 × 1 25《米制粗螺距ISO螺纹M1至M10和米制细螺距ISO螺纹M1.pdf

DIN 373-2007 Counterbores with parallel shank and solid pilot《带直柄和固定导杆的埋头钻》.pdf

DIN 374-2016 Machine screwing taps for fine pitch metric ISO-threads M3 × 0 2 to M52 × 4《米制细螺距ISO螺纹M3×0 2至M52×4机器丝锥》.pdf

DIN 375-2007 Counterbores with Morse taper shank and detachable pilot《带莫氏锥柄和可拆卸导柱的埋头钻》.pdf