JB T 2462 11-2017 《组合机床通用部件 第11部分 多轴钻削头 参数和尺寸》.pdf

相关资源

JB T 2462.11-1999 组合机床通用部件 多轴钻削头 参数和尺寸.pdf

JB T 2462.11-1999 组合机床通用部件.多轴钻削头.参数和尺寸.pdf

猜你喜欢

KS M ISO 2554-2010 Plastics－Unsaturated polyester resins－Determination of hydroxyl value《塑料 不饱和聚酯树脂 羟基值的测定》.pdf

KS M ISO 2555-2002 Plastics－Resins in the liquid state or as emulsions or dispersions －Determination of apparent viscosity by the Brookfield test method《塑料 液态或象乳胶或分散体一样的树脂 布洛克菲文德粘度.pdf

KS M ISO 2556-2006 Plastics－Determination of the gas transmission rate of films and thin sheets under atmospheric pressure－Manometric method《塑料 大气压力下薄膜和薄板的气体透过率的测定 测压法》.pdf

KS M ISO 2578-2007 Plastics－Determination of time－temperature limits after prolonged exposure to heat《塑料 长期暴露于热作用后时间和温度极限值的测定》.pdf

KS M ISO 2592-2007 Determination of flash and fire points－Cleveland open cup method《闪点和燃点的测定 克利夫兰开口杯法》.pdf

KS M ISO 276-2012 Binders for paints and varnishes－Linseed stand oil－Requirements and methods of test《涂料和清漆用粘合剂 亚麻子油 要求和试验方法》.pdf

KS M ISO 277-2012 Binders for paints and varnishes－Raw tung oil－ Requirements and methods of test《涂料和清漆用粘合剂 生桐油 要求和试验方法》.pdf

KS M ISO 27727-2009 Rubber vulcanized－Measurement of fatigue crack growth rate《硫化橡胶 疲劳裂缝扩展率的测量》.pdf

KS M ISO 2796-2010 Cellular plastics rigid－Test for dimensional stability《硬质泡沫塑料 尺寸稳定性试验》.pdf