JB T 8354 2-2015 Metallic abrasives of shot blast cleaning and shot peening Part 2 High carbon cast steel shot《抛喷丸清理及强化用金属磨料 第2部分 高碳铸钢丸》.pdf

相关资源

JB T 11552-2013 抛喷丸强化 技术条件.pdf

JB T 8355-1996 抛喷丸设备 通用技术条件.pdf

JB T 8355-1996 抛喷丸设备.通用技术条件.pdf

GB T 23576-2009 抛喷丸设备.通用技术条件.pdf

JB T 8495-1996 抛喷丸清理室 技术条件.pdf

JB T 8495-2010 台车抛喷丸清理机 技术条件.pdf

JB T 7459-2017 《单钩抛喷丸清理机 技术条件》.pdf

JB T 8354.1-2013 抛喷丸清理及强化用金属磨料 第1 部分：钢丝切丸.pdf

JB T 7459-2007 单钩抛喷丸清理机.技术条件.pdf

JB T 7459-2007 单钩抛喷丸清理机 技术条件.pdf

猜你喜欢

ASTM D7434-2008(2014) 0825 Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Palletized or Unitized Loads《测定托盘化或.pdf

ASTM D7435-2008 374 Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Loaded Containers《测定已装货集装箱中被动式无线射频识别(RFID).pdf

ASTM D7435-2008(2014) 2921 Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Loaded Containers《测定荷载容器上无源射频识别 (RF.pdf

ASTM D7436-2011 8750 Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodolo.pdf

ASTM D7436-2012 1875 Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodolo.pdf

ASTM D7436-2017 red 0000 Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Metho.pdf

ASTM D7437-2008 952 Standard Test Method for Temperature and Hard Water Stability of Engine Coolants《发动机冷却剂的温度和硬水中稳定性的标准试验方法》.pdf

ASTM D7437-2008(2013) 3750 Standard Test Method for Temperature and Hard Water Stability of Engine Coolants《发动机冷却剂的温度和硬水中稳定性的标准试验方法》.pdf

ASTM D7438-2008 895 Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters《手持式水分仪应用和现场校准的标准实施规程》.pdf