JB ZQ 4178-2006 Sealed cap for union joint《活接头用密封盖》.pdf

相关资源

JB T 20208-2024 大蜜丸凉丸机.pdf

JB T 20207-2024 中药配方颗粒调剂设备.pdf

JB T20104-2022 片剂硬度仪.pdf

JB T20098-2022 抗生素玻璃瓶液体灌装联动线.pdf

JB T20205-2022 脱气仪.pdf

JB T20206-2022 生物制药反应过程温控装置.pdf

JB T20103-2022 蒸发浓缩器.pdf

JB T20099-2022 药物过滤洗涤干燥机.pdf

JB T20108-2022 药用脉冲式布袋除尘器.pdf

JB T20203-2022 药物溶液颜色测定仪.pdf

猜你喜欢

FORD WSS-M4D840-A5-2011 ACETAL (POM) COPOLYMER MOLDED-IN-COLOR INTERIOR LOW GLOSS MELT FLOW RATE 11 C 18 g 10 MINUTES TO BE USED WITH FORD WSS-M99P1111-A 《内部低光泽着色模塑且熔态流动率为11-18 g.pdf

FORD WSS-M4D840-A6-2008 ACETAL (POM) COPOLYMER MOLD IN COLOR METALLIC MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用乙缩醛共聚物(POM)着色模塑金属状成型料 与标准FORD WSS-M99P1.pdf

FORD WSS-M4D840-B1-2011 ACETAL (POM) COPOLYMER MOLDED-IN-COLOR INTERIOR MELT FLOW RATE 7 - 11 g 10 MINUTES TO BE USED WITH FORD WSS-M99P1111-A 《内部用着色模塑且熔态流动率为7-11 g 10 min的乙缩醛(PO.pdf

FORD WSS-M4D840-B1-2015 ACETAL (POM) COPOLYMER MOLDED-IN-COLOR INTERIOR UV STABLE TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D841-A4-2011 POLYPROPYLENE (PP) COPOLYMER 11 - 17% MINERAL FILLED HIGH MELT FLOW MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《11-17%矿物填充高熔态流动聚丙烯(PP)共聚物模塑材料 与.pdf

FORD WSS-M4D841-A5-2011 POLYPROPYLENE (PP) COPOLYMER 11 - 17% MINERAL FILLED HIGH MELT FLOW MOLDING COMPOUND 25% MINIMUM PCR TO BE USED WITH FORD WSS-M99P1111-A 《11-17%矿物填充高熔态流动2.pdf

FORD WSS-M4D841-A6-2011 POLYPROPYLENE (PP) COPOLYMER 13 % TALC REINFORCED BLOW MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚丙烯(PP)共聚物 13%云母增强吹塑材料 与福特WSS-M99P1111-A 一起.pdf

FORD WSS-M4D851-A2-2011 POLYPROPYLENE (PP) FOAM PHYSICALLY CROSSLINKED CLOSED CELL 40 kg m3 TO BE USED WITH FORD WSS-M99P1111-A 《交联闭室40 kg m3的聚丙烯(PP)泡沫 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSS-M4D854-A4-2012 POLYPROPYLENE (PP) 30% GLASS FIBER REINFORCED MOLDING COMPOUND 50% MIN RECYCLED CONTENT TO BE USED WITH FORD WSS-M99P1111-A .pdf