JB ZQ 4605-2006 J-shaped unreinforced rubber seal ring self-tight spring《J形无骨架橡胶密封圈自紧弹簧》.pdf

相关资源

CB 1236-1995 鱼雷用O形橡胶密封圈规格及密封结构设计方法.pdf

HB 5584-1981;HB 5585-1981 橡胶密封圈.pdf

HB 6691-1993 耐磷酸酯液压油O形橡胶密封圈挡圈.pdf

HB 6692-1993 耐磷酸酯液压油O形橡胶密封圈沟槽.pdf

HG 2943-1984(1997) 日用压力锅橡胶密封圈.pdf

HG T 2810-2008 往复运动橡胶密封圈材料.pdf

JB T 6375-1992 气动阀用橡胶密封圈尺寸系列和公差.pdf

JB T 6997-1993 U形内骨架橡胶密封圈.pdf

JB T 6997-2007 U形内骨架橡胶密封圈.pdf

JC T 946-2005 混凝土和钢筋混凝土排水管用橡胶密封圈.pdf

猜你喜欢

SAE AMS 7271J-2010 Rings Sealing Butadiene-Acrylonitrile (NBR) Rubber Fuel and Low Temperature Resistant 60 - 70《丁二烯-丙烯腈(NBR)橡胶耐燃料耐低温60-70环形密封件》.pdf

SAE AMS 7272G-2013 Rubber Butadiene-Acrylonitrile (NBR) Synthetic Lubricant Resistant 65 C 75 Hardness For Seals in Synthetic Lubricant Systems《橡胶 合成润滑剂系统中用密封圈硬度为67-75的腈基丁二烯橡胶(NBR).pdf

SAE AMS 7273D-2011 Rubber Fluorosilicone (FVMQ) High Temperature Fuel and Oil Resistant For Seals In Fuel Systems and Specific Engine Oil Systems《橡胶 氟硅橡胶(FVMQ)高温燃料和密封在燃油系统和特殊内燃机油系统.pdf

SAE AMS 7274J-2014 Rubber Butadiene-Acrylonitrile (NBR) 65 to 75 Hardness For Elastomeric Seals in Aircraft Engine Oil Systems《飞机发动机燃油系统弹性密封用硬度为65至75的丁腈橡胶 (NBR)》.pdf

SAE AMS 7276H-2011 Rubber Fluorocarbon (FKM) High-Temperature-Fluid Resistant Low Compression Set For Seals In Fuel Systems and Specific Engine Oil Systems《橡胶 氟橡胶(FKM)高温燃料和密封在燃油系统和.pdf

SAE AMS 7284 1-1990 Rings Sealing Phosphonitrilic Fluoroelastomer (FZ) Aviation Fuel Resistant 65 - 75 Shore A《耐航空燃料的65-75 Shore A 磷氮基氟橡胶(FZ)密封环》.pdf

SAE AMS 7284 2-1990 Rings Sealing Phosphonitrilic Fluoroelastomer (FZ) Aviation Fuel-Resistant 75 - 85 Shore A《耐航空燃料的75-85 Shore A 磷氮基氟橡胶(FZ)密封环》.pdf

SAE AMS 7287-2012 Fluorocarbon Elastomer (FKM) High Temperature HTS Oil Resistant Fuel Resistant Low Compression Set 70 to 80 Hardness Low Temperature Tg -22 (-30 For Seals in O.pdf

SAE AMS 7290H-2013 Decalcomanias《贴花纸》.pdf