JTJ 253-1987 Code for design of dock gates and filling and emptying systems of dry docks《干船坞坞门及灌水排水系统设计规范》.pdf

相关资源

GB T 19294-2003 航空摄影技术设计规范.pdf

YD 5206-2014 宽带光纤接入工程设计规范.pdf

YD 5076-2014 固定电话交换网工程设计规范.pdf

JTG D50-2017 公路沥青路面设计规范.pdf

JTG T D65-05-2015 公路悬索桥设计规范.pdf

YD 5098-2005 通信局(站)防雷与接地工程设计规范.pdf

YD 5102-2010 通信线路工程设计规范.pdf

GY 5066-2000 电影摄影棚灯光系统设计规范.pdf

AQ 1076-2009 煤矿低浓度瓦斯管道输送安全保障系统设计规范.pdf

GA T 515.2-2011 公安交通指挥系统设计规范第2部分：省（自治区）公安交通指挥系统.pdf

猜你喜欢

SAE AMS 3272 3B-2011 Cloth Nylon Polyurethane Coated Plain Weave 9 2 ounces square yard (310 g m2)《9 2盎司 平方码(310 g m)涂覆聚氨酯的平纹尼龙织物》.pdf

SAE AMS 3272B-2011 Cloth Nylon Polyurethane Coated Thermally Radio Frequency or Ultrasonically Sealable《射频或超声密封热聚氨酯涂覆的尼龙布》.pdf

SAE AMS 3273F-2011 Chloropene (CR) Rubber Sheet Nylon Cloth Reinforced Weather Resistant《耐风化的尼龙布增强氯丁(CR)橡胶薄板》.pdf

SAE AMS 3274H-2011 Acrylonitrile Butadiene (NBR) Rubber Sheet and Molded Shapes Nylon Cloth Reinforced Fuel Resistant《耐燃料的尼龙织物增强的丁腈橡胶薄板和模制型材》.pdf

SAE AMS 3275C-2009 Sheet Acrylonitrile Butadiene (NBR) Rubber and Non-Asbestos Fiber Fuel and Oil Resistant《非石棉纤维 耐燃料及耐油丁腈橡胶(NBR)薄板》.pdf

SAE AMS 3276E-2008 Sealing Compound Integral Fuel Tanks and General Purpose Intermittent Use to 360 F (182 C)《断续使用至360℉(182℃)的整体油箱和一般用途用密封化合物》.pdf

SAE AMS 3276G-2016 Sealing Compound Integral Fuel Tanks and General Purpose Intermittent Use to 360 (182 .pdf

SAE AMS 3278A-2008 Sealing and Coating Compound Polyurethane (PUR) Fuel Resistant High Tensile Strength Elongation For Integral Fuel Tanks Fuel Cavities General Purpose《密封和涂料混合物.pdf

SAE AMS 3279D-2013 Sealing Compound Sprayable for Integral Fuel Tanks and Fuel Cell Cavities For Intermittent Use to 350F (177C)《断续使用至350℉(177℃)的整体油箱和油箱空腔用可喷涂密封化合物》.pdf