JTS 171-2016 Design Code of Fixed Offshore Platform for Transshipment《海上固定转载平台设计规范》.pdf

相关资源

GB T 19294-2003 航空摄影技术设计规范.pdf

YD 5206-2014 宽带光纤接入工程设计规范.pdf

YD 5076-2014 固定电话交换网工程设计规范.pdf

JTG D50-2017 公路沥青路面设计规范.pdf

JTG T D65-05-2015 公路悬索桥设计规范.pdf

YD 5098-2005 通信局(站)防雷与接地工程设计规范.pdf

YD 5102-2010 通信线路工程设计规范.pdf

GY 5066-2000 电影摄影棚灯光系统设计规范.pdf

AQ 1076-2009 煤矿低浓度瓦斯管道输送安全保障系统设计规范.pdf

GA T 515.2-2011 公安交通指挥系统设计规范第2部分：省（自治区）公安交通指挥系统.pdf

猜你喜欢

ASTM C807-2008 Standard Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle《用维卡特贯入度测定水凝水泥灰浆的凝固时间的标准试验方法》.pdf

ASTM C807-2013 Standard Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle《使用维卡特贯入度测定水凝水泥灰浆的凝固时间的标准试验方法》.pdf

ASTM C808-1975(2005) Standard Guideline for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials《炭加工的及石墨制承重材料和密封材料的磨擦及磨蚀结果的报告标准指南.pdf

ASTM C808-1975(2010)e1 Standard Guideline for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials《炭加工的及石墨制承重材料和密封材料的磨擦及磨蚀结果的报告标准.pdf

ASTM C808-1975(2016) Standard Guide for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials《人造碳和石墨轴承与密封材料的摩擦力和磨损试验结果报告标准指南》.pdf

ASTM C809-1994(2007) Standard Test Methods for Chemical Mass Spectrometric and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and Aluminum Oxide-Boron Carbide Composite P.pdf

ASTM C809-2013 Standard Test Methods for Chemical Mass Spectrometric and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and AluminumOxide-Boron Carbide Composite Pellets《.pdf

ASTM C810-1990(2006) Standard Test Method for Nickel on Steel for Porcelain Enameling by X-Ray Emission Spectrometry《用X射线发射光谱法测定搪瓷用钢表面镍沉积量的标准试验方法》.pdf

ASTM C810-1990(2011)e1 Standard Test Method for Nickel on Steel for Porcelain Enameling by X-Ray Emission Spectrometry《用X射线发射光谱法测定搪瓷用钢表面镍沉积量的标准试验方法》.pdf