QJ 3287 7-2006 《带衬垫卡箍 第7部分：双面固定卡箍》.pdf

相关资源

QJ 177.16A-1995 通用卡箍 螺旋卡箍.pdf

QJ 177.14A-1995 通用卡箍 弹性卡箍.pdf

QJ 177.11A-1995 通用卡箍 悬挂双卡箍.pdf

QJ 177.17A-1995 通用卡箍 螺钉可调卡箍.pdf

QJ 177.13A-1995 通用卡箍 无耳弹性卡箍.pdf

QJ 177.12A-1995 通用卡箍 双面固定卡箍.pdf

SAE AS 9354-1998 CLAMP LOOP - ALUMINUM 265 HOLE《铝制环形卡箍 265孔》.pdf

QJ 177.7A-1995 通用卡箍 双面固定半卡箍.pdf

QJ 177.3A-1995 通用卡箍 中间固定双卡箍.pdf

SAE MA 2150 4-1991 CLAMP SUPPORT LOOP CLAMP METRIC《环形卡箍支架（米制）》.pdf

猜你喜欢

TCVN 5342-1991 Metal cutting machines methods for control of straight for ward of surfaces《金属切割机 表面榫槽直线控制方法》.pdf

TCVN 5343-1991 METAL CUTTING MACHINES Methods for control of perpendicular of axle relatively plane《金属切割机 轴向相对平面垂直控制方法》.pdf

TCVN 5344-1991 Corrosion-resistant steel and alloys Method for determination of intergranular corrosion resistant《耐蚀钢与合金 耐晶间腐蚀性的测定方法》.pdf

TCVN 5345-1991 Steel Metallographic method for the determination of microstructure of sheets and bands of unalloyed structural steels《钢 非合金结构钢钢板和钢带显微结构的测定方法》.pdf

TCVN 5346-1991 Safety requirements boilers General requirements for calculation stability《锅炉安全要求 稳定性计算的一般要求》.pdf

TCVN 5347-1991 Graphite Methods for sampling and preparation of samples for testing《石墨 试验用样品取样和制备方法》.pdf

TCVN 5348-1991 Graphite General requirements for methods of analysis《石墨 分析方法一般要求》.pdf

TCVN 5349-1991 Graphite Method for the determination of moisture content《石墨 含水量的测定方法》.pdf

TCVN 5350-1991 Graphite Method for the determination of volatil matter《石墨 挥发物的测定方法》.pdf