QJ 799A-1997 《机床夹具零件及部件 高速铰孔用旋转导套》.pdf

相关资源

QJ 97 1A-1997 《机床夹具零件及部件 滑动弯头压板 弯头压板》.pdf

QJ 96 1A-1997 《机床夹具零件及部件 滑动平头压板 平头压板》.pdf

QJ 94 2A-1997 《机床夹具零件及部件 Ⅴ型定位器 Ⅱ型定位器》.pdf

QJ 94 1A-1997 《机床夹具零件及部件 Ⅴ型定位器 Ⅰ型定位器》.pdf

QJ 903B-2011 Management regulations for process documents of space products《航天产品工艺文件管理制度》.pdf

QJ 903 33-2014 Management regulations for process documents of space products Part 33 Regulations for programming and using of NC《航天产品工艺文件管理制度　第33部分：数控程序编制与使用规定.pdf

QJ 808A-1997 《机床夹具零件及部件 轴向夹紧装置》.pdf

QJ 808 2A-1997 《机床夹具零件及部件 轴向夹紧装置 锥面垫圈》.pdf

QJ 807 4A-1997 《机床夹具零件及部件 虎钳式夹紧装置 制动块》.pdf

QJ 807 3A-1997 《机床夹具零件及部件 虎钳式夹紧装置 螺杆》.pdf

猜你喜欢

DIN 25700-1995 Measurements of surface contamination on vehicles and their loadings in exceptional situations requiring radiation protection measures《在异常条件下要求辐射防护措施的车辆及其装载物表面污染度的测量.pdf

DIN 25701-1991 Determination of the solubility of plutonium from unirradiated mixed oxide nuclear fuels in nitric acid《无放射性混合氧化物核燃料的钚在硝酸中溶解度的测定》.pdf

DIN 25703-1993 Determination of the uranium and plutonium content in nitric acid solutions by wavelength dispersive X-ray fluorescence analysis《硝酸溶液中铀含量和钚含量的测定 波长分散X射线荧光分析法》.pdf

DIN 25704-1993 Determination of the plutonium content in sulphuric and nitric acid solutions potentiometric titration method with potassium dichromate《硝酸溶液和硫酸溶液中钚含量的测定 重铬酸钾电位滴定法》.pdf

DIN 25705-1993 Ceramography of sintered nuclear fuel tablets《烧结的核燃料片的陶瓷相学》.pdf

DIN 25706-1-1994 Passive measurements of radon - Part 1 Track etch method《氡的无源测量 第1部分 记录槽蚀刻法》.pdf

DIN 25706-2-1994 Passive measurements of radon - Part 2 Charcoal measuring method《氡的无源测量 第2部分 活性碳测量法》.pdf

DIN 25707-1994 Determination of the oxygen uranium ratio in uranium dioxide nuclear fuels《二氧化铀核燃料中氧铀比例的测定》.pdf

DIN 25708-1995 Determination of metallic impurities in nuclear fuels by optical emission spectrometry with inductively coupled plasma excitation《用耦合等离子激发感应光学发射光谱法测定核燃料中的金属杂质》.pdf