SH T 0818-2010 8125 Asphalt-rubber binder 《橡胶沥青》.pdf

相关资源

SH T 1842-2023 液体异戊二烯橡胶.pdf

SH T 1841-2023 乙烯-丙烯-二烯烃橡胶（EPDM）.pdf

SH T 1628.2-2023 工业用乙酸乙烯酯纯度及有机杂质的测定 气相色谱法.pdf

SH T 1839-2023 溴化异丁烯-异戊二烯橡胶（BIIR）中溴含量的测定 X荧光光谱法.pdf

SH T 1673-2023 工业用环己烷.pdf

SH T 1836-2023 塑料 超高分子量聚乙烯（PE-UHMW）熔体体积流动速率（MVR）的测定.pdf

SH T 1838-2023 塑料 乙烯-α-烯烃共聚物短链支化分布的测定 差示扫描量热法（DSC）.pdf

SH T 1628.1-2023 工业用乙酸乙烯酯 第1部分：规格.pdf

SH T 1674-2023 工业用环己烷纯度及烃类杂质的测定 气相色谱法.pdf

SH T 1496-2022 工业用叔丁醇酸度的测定 滴定法.pdf

猜你喜欢

AECMA PREN 3989-1997 Aerospace Series Steel FE-PA2801 (X60NiMnCr13-5-3) Cold Workde and Stress Relieved Bar for Machining De Less Than or Equal to 30 mm Rm Greater Than or Equal to.pdf

AECMA PREN 3990-1997 Aerospace Series Steel FE-PA2801 (X60NiMnCr13-5-3) Softened Bar for Machining De Less Than or Equal to 150 mm 620 MPa Less Than or Equal to Rm Less Than or Equ.pdf

AECMA PREN 3991-1997 Aerospace Series Steel FE-PA2801 (X60NiMnCr13-5-3) Non Heat Treated Forging Stock a or D Less Than or Equal to 350 mm Edition P 1《航空航天系列.FE-PA2801(X60NiMnCr13-.pdf

AECMA PREN 3992-1997 Aerospace Series Steel FE-PA2801 (X60NiMnCr13-5-3) Softened Forgings De Less Than or Equal to 150 mm 620 MPa Less Than or Equal to Rm Less Than or Equal to 900.pdf

AECMA PREN 3993-1997 Aerospace Series Steel FE-CM1501 (X13CrNiMoCo12-3-2-2) Hardened and Tempered Precision and Sand Castings De Less Than or Equal to 150 mm Rm Greater Than or Equ.pdf

AECMA PREN 3994-1997 Aerospace Series Steel FE-CM1501 (X13CrNiMoCo12-3-2-2) Non Heat Treated Remelting Stock Edition P 1《航空航天系列.FE-CM1501(X13CrNiMoCo12-3-2-2)非热处理钢　再熔原料》.pdf

AECMA PREN 3996-1993 Aerospace Series Aluminium AL-P1100-H14 Sheet and Strip 0 3 mm Less Than or Equal to a Less Than or Equal to 6 mm Edition P1《航空航天系列.AL-P1100-H14型铝合金 0 3mm＜a小于或.pdf

AECMA PREN 3997-2002 Aerospace Series Aluminium Alloy AL-P2024-T3 Sheet and Strip 0 4 mm Less Than or Equal to a Less Than or Equal to 6 mm Edition P 1《航空航天系列.AL-P2024-T3型铝合金 0 4mm.pdf

AECMA PREN 3999-2002 Aerospace Series Aluminium Alloy AL-P2024-T351 Sheet and Strip with Improved Chemical Milling Capability 1 6 mm Less Than or Equal to a Less Than or Equal to 6.pdf