SY T 7066-2016 Calculation method of energy saved for gas field《气田节能量计算方法》.pdf

相关资源

JIS G0702-1995 连续式钢材加热炉的热平衡计算方法.pdf

JIS G0703-1995 电弧炉热平衡计算方法.pdf

GB T 27724-2011 普通长网造纸机系统能量平衡及能量效率计算方法.pdf

GB T 27727-2011 筛选、CEHP四段漂白系统能量平衡及能量效率计算方法.pdf

GB T 17247.2-1998 声学 户外声传播的衰减 第2部分：一般计算方法.pdf

GB T 27736-2011 制浆造纸企业生产过程的系统能量平衡计算方法通则.pdf

JIS C8020-2005 荧光照明设备能效指数的计算方法.pdf

JIS C9901-2010 电气和电子装置的能效达标百分率的计算方法和表达式.pdf

JIS G4310-1999 不锈钢板、薄板及耐热钢板、薄板的质量计算方法.pdf

JIS K2283-2000 原油及石油产品运动粘度的测定方法及石油产品粘度指数的计算方法.pdf

猜你喜欢

DLA MS51988 REV B (1)-1996 NUT SELF-LOCKING FLANGED PREVAILING TORQUE STEEL CADMIUM UNC AND UNF《UNC及UNF镉钢流行扭矩折边自锁螺帽》.pdf

DLA MS51988 REV B NOTICE 1-2000 NUT SELF-LOCKING FLANGED PREVAILING TORQUE STEEL CADMIUM UNC AND UNF《UNC及UNF镉钢流行扭矩折边自锁螺帽》.pdf

DLA MS51988 REV B VALID NOTICE 2-2005 NUT SELF-LOCKING FLANGED PREVAILING TORQUE STEEL CADMIUM UNC AND UNF《UNC及UNF镉钢流行扭矩折边自锁螺帽》.pdf

DLA MS51988 REV B-1970 NUT SELF-LOCKING FLANGED PREVAILING TORQUE STEEL CADMIUM UNC AND UNF《UNC及UNF镉钢流行扭矩折边自锁螺帽》.pdf

DLA MS51993 REV B-2012 INSERT SCREW THREAD-LOCKED IN RING LOCKED SERRATED HIGH STRENGTH.pdf

DLA MS51994 REV A VALID NOTICE 1-2001 HOLE PREPARATION-RING LOCKED INSERTS AND STUDS STANDARD DIMENSIONS FOR《标准尺寸环形锁定嵌块及柱头螺栓打孔》.pdf

DLA MS51994 REV A-1988 HOLE PREPARATION-RING LOCKED INSERTS AND STUDS STANDARD DIMENSIONS FOR《标准尺寸环形锁定嵌块及柱头螺栓打孔》.pdf

DLA MS51996 REV A (1)-2002 HOLE-PREPARATION-RING LOCKED INSERTS AND STUDS HIGH STRENGTH STANDARD DIMENSIONS FOR《标准尺寸高强度环形锁定嵌块及柱头螺栓打孔》.pdf

DLA MS51996 REV A-1985 HOLE-PREPARATION-RING LOCKED INSERTS AND STUDS HIGH STRENGTH STANDARD DIMENSIONS FOR《标准尺寸高强度环形锁定嵌块及柱头螺栓打孔》.pdf