YD T 3038-2016 Technical requirement to data format of phishing attack information reporting《钓鱼攻击举报数据交换协议技术要求》.pdf

相关资源

YD T 4978-2024 工业互联网安全监测与管理系统通用要求.pdf

YD T 5226-2023 支持多业务承载的本地IP MPLS网络工程技术规范.pdf

YD T 4975-2024 工业互联网安全隔离与信息交换系统技术要求.pdf

YD T 4972-2024 互联网码号资源公钥基础设施（RPKI） 资源列表.pdf

YD T 4957-2024 5G移动通信网络设备安全保障要求 基站.pdf

YD T 5255-2023 移动物联网eMTC工程技术规范.pdf

YD T 4970-2024 基于SIM卡的物联网安全服务技术要求.pdf

YD T 4961.4-2024 隐私计算 跨平台互联互通 第4部分：应用要求.pdf

YD T 5267-2023 多接入边缘计算系统工程技术规范.pdf

YD T 4964-2024 BGPsec技术要求 BGPsec协议.pdf

猜你喜欢

FORD WSS-M4D1005-B2-2015 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) HIGH MELT FLOW LOW DENSITY 17% MINERAL FILLED FULLY PAINTED ONLY MOLDING COMPOUND FASCIA THIN-WALLED EXTERIOR T.pdf

FORD WSS-M4D1005-B2-2018 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) HIGH MELT FLOW LOW DENSITY 17% MINERAL FILLED FULLY PAINTED ONLY MOLDING COMPOUND FASCIA THIN-WALLED EXTERIOR T.pdf

FORD WSS-M4D1006-A1-2013 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE) 55 DUROMETER D HARDNESS BLOW MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D1006-A2-2013 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE) 70 DUROMETER D HARDNESS BLOW MOLDING COMPOUND.pdf

FORD WSS-M4D1009-A1-2012 POLYAMIDE (PA) 66 HEAT STABILIZED 20% GLASS FIBER REINFORCED BLOW MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《热稳定20%玻璃纤维增强聚酰胺(PA)66吹塑材料 与福特WSS.pdf

FORD WSS-M4D1011-A1-2012 POLYAMIDE (PA) 6 HEAT STABILIZED 10% GLASS REINFORCED BLOW MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D1014-A-2010 POLYBUTYLENE TEREPHTHALATE (PBT) MOLDING COMPOUND DIRECT METALLIZABLE GRADE TO BE USED WITH FORD WSS-M99P1111-A 《直接可涂覆金属级聚对苯二甲酸丁二醇酯(PBT)成型料 与标准FORD WSS-M.pdf

FORD WSS-M4D1016-A1-2015 POLYAMIDE (PA) 66 HEAT STABILIZED 25% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D1017-A1-2012 POLYBUTYLENE TEREPHTHALATE (PBT) 30% GLASS FIBER REINFORCED MOLDING COMPOUND HYDROLYSIS RESISTANT TO BE USED WITH FORD WSS-M99P1111-A .pdf