MNOSZ 2980-1951 《工业用管道水平标记》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NF E66-380-1985 Ground high speed steel tool bits Dimensions 《磨光的高速钢刀头 尺寸》.pdf

NF E66-405-1983 Shanks for pneumatic hammers 《空气锤的连接杆》.pdf

NF E66-502-1993 Basic quantities in cutting and grinding Part 1 geometry of the active part of cutting tools General tems reference systems tool and working angles chip breakers 《.pdf

NF E66-505-1993 Tool-life testing with single-point turning tools 《单刃车刀的刀具寿命试验》.pdf

NF E66-506-1985 Basic quantities in cutting and grinding Geometric and kinematic quantities in cutting 《切削和磨削的基本数值 切削加工时几何和运动学数值》.pdf

NF E66-507-1985 Basic quantities in cutting and grinding Forces energy power 《却学和磨削的基本数值 力、能量和功率》.pdf

NF E66-508-1991 Basic quantities in cutting and grinding Part 5 basic terminology for grinding processes using grinding wheels 《切割和磨削的基本量 第5部分 砂轮磨削工艺的基本术语》.pdf

NF E66-511-1989 Tool life testing in milling Part 1 face milling 《铣刀寿命试验 第1部分 平面铣削加工》.pdf

NF E66-512-1989 Tool life testing in milling Part 2 end milling 《铣刀寿命试验 第2部分 端铣削加工》.pdf