HB 5434.10-2004 《航空机轮摩擦材料试验方法 第10部分 与钢背的结合性及钢背塑性试验方法.pdf

相关资源

HB_Z 413-2013(2017) 民用飞机结构耐久性设计准则.pdf

HB_Z 422-2014(2017) 民用飞机综合模块化航空电子系统开发与认证指南.pdf

HB_Z 407.1-2013(2017) 铝合金零件压弯成形与校形工艺 第1部分：壁板类零件.pdf

HB_Z 410-2013(2017) 树脂基复合材料制件修补工艺.pdf

HB_Z 421-2014(2017) 民用飞机机载系统和设备软件合格审定保证指南.pdf

HB_Z 416-2014(2017) 航空铝合金构件搅拌摩擦焊工艺.pdf

HB_Z 409-2013(2017) 树脂基复合材料制件机械加工工艺.pdf

HB_Z 414-2014(2017) 民用飞机供电管理通用指南.pdf

HB_Z 419-2017 民用飞机用钛及钛合金热处理工艺.pdf

HB 9114-2012(2017) 航空企业直接发货指南.pdf

猜你喜欢

NASA NACA-TN-3360-1955 Some effects of propeller operation and location on ability of a wing with plain flaps to deflect propeller slipstreams downward for vertical take-off《螺旋桨的操作.pdf

NASA NACA-TN-3364-1955 Investigation of effectiveness of large-chord slotted flaps in deflecting propeller slipstreams downward for vertical take-off and low-speed flight《对于垂直起飞和低速.pdf

NASA NACA-TN-3393-1955 An experimental investigation of the base pressure characteristics of nonlifting bodies of revolution at Mach numbers from 2 73 to 4 98《当马赫数为2 73至4 98时 无升力回转.pdf

NASA NACA-TN-3394-1955 Low-speed investigation of the effects of angle of attack on the pressure recovery of a circular nose inlet with several lip shapes《攻角对带有唇形的圆形机头进气道压力恢复影响的低速研.pdf

NASA NACA-TN-3400-1955 Analysis of errors introduced by several methods of weighting nonuniform duct flows《由称量不均匀导管流量一些方法引入的错误分析》.pdf

NASA NACA-TN-3422-1955 Noise survey of a 10-foot four-blade turbine-driven propeller under static conditions《在静态条件下 10 ft四叶涡轮机驱动螺旋桨的噪声研究》.pdf

NASA NACA-TN-3466-1955 An investigation of the discharge and drag characteristics of auxiliary-air outlets discharging into a transonic stream《将辅助排气口放入跨音速流排放和阻力特性的研究》.pdf

NASA NACA-TN-3481-1955 Wind-tunnel investigation at low speed of effect of size and position of closed air ducts on static longitudinal and static lateral stability characteristicspect.pdf

NASA NACA-TN-3488-1955 Some measurements of flow in a rectangular cutout《对矩形排气阀中气流的一些测量》.pdf