HB 6813.4-1993 《气动量仪测具用零件 喷嘴》.pdf

相关资源

JB 3760-1991 浮标式气动量仪.pdf

JB T 3760-2008 浮标式气动量仪.pdf

JB T 4167-1999 薄膜式气动量仪.pdf

HB 6804-1993 2000倍气动量仪用外径测量头.pdf

HB 6815-1993 气动量仪外径测量头用校对柱.pdf

HB 6807-1993 5000倍气动量仪用外径测量头.pdf

HB 6810-1993 10000倍气动量仪用外径测量头.pdf

JB T 54265-1999 量具量仪产品质量分等 浮标式气动量仪（内部使用）.pdf

HB 6813.4-1993 气动量仪测具用零件喷嘴.pdf

猜你喜欢

ONORM ISO 2234-1987 Packaging complete filled transport packages stacking tests using static load《包装 完整填充运输包装 静载荷法堆垛试验》.pdf

ONORM ISO 2248-1988 Packaging complete filled transport packages vertical impact fest by dropping《包装 完整填充运输包装 坠落垂直冲击试验》.pdf

ONORM ISO 2271-1987 Surface active agents detergents determination of anionic-active matter (direct two-phase titration procedure)《表面活性剂 去污剂 阴离子活性物质的测定（直接双相滴定法程序）》.pdf

ONORM ISO 228 Teil 1-1982 Pipe threads where pressure-tight joints are not made on the threads Designation dimensions and tolerances《非螺纹密封的管螺纹 命名、尺寸和公差》.pdf

ONORM ISO 228 Teil 2-1984 Pipe threads where pressure-tight joints are not made on the threads Verification by means of limit gauges《非螺纹密封的管螺纹 限制量规确认》.pdf

ONORM ISO 2320-1991 《带有夹持部分的六角螺母 机械和功能特性》.pdf

ONORM ISO 2380 Teil 1-1990 Screwdrivers for slotted-head screws tips for hand- and machine-operated screwdrivers《槽头螺钉改锥 手工及机械操作用的改锥头》.pdf

ONORM ISO 2380-2-1993 Screwdrivers for slotted-head screws General requirements lengths of blades and marking of hand-operated screwdrivers《槽头螺钉改锥 手动改锥的一般要求、刀刃长度和标记》.pdf

ONORM ISO 261-1982 ISO general purpose metric screw threads General plan《ISO普通公制螺纹 总图》.pdf