HB 7344.40-1996 《数控机床用夹具元件 大型钳式侧向夹紧器》.pdf

相关资源

JIS B6190-4-2008 机床试验规程.第4部分数控机床的圆弧检验.pdf

HB 6829-1993 数控机床用二齿直柄立铣刀 d=3~10mm.pdf

HB 6830-1993 数控机床用二齿削平型直柄立铣刀 d=6~20mm.pdf

HB 6831-1993 数控机床用三齿削平型直柄立铣刀 d=6~28mm.pdf

HB 6837-1993 数控机床用三齿端刃过中心莫氏锥柄立铣刀 d=14~28mm.pdf

HB 6838-1993 数控机床用四齿莫氏锥柄立铣刀 d=14~50mm.pdf

HB 6839-1993 数控机床用六齿莫氏锥柄立铣刀 d=22~63mm.pdf

HB 6840-1993 数控机床用普通立铣刀技术条件.pdf

HB 6949-1994 数控机床用可转位复合夹紧外圆车刀.pdf

HB 6950-1994 数控机床用可转位复合夹紧75'。偏头端面车刀.pdf

猜你喜欢

ASTM D5171-2009a Standard Test Method for Impact Resistance of Plastic Sew-Through Buttons《塑料线缝纽扣的耐撞击性标准试验方法》.pdf

ASTM D5171-2015 Standard Test Method for Impact Resistance of Plastic Sew-Through Buttons《塑料线缝纽扣抗冲击性的标准试验方法》.pdf

ASTM D5172-1991(2004) Standard Guide for Documenting the Standard Operating Procedures Used for the Analysis of Water《为水质分析操作程序提供资料》.pdf

ASTM D5172-1991(2010)e1 Standard Guide for Documenting the Standard Operating Procedures Used for the Analysis of Water《水分析用标准操作程序文件编制的标准指南》.pdf

ASTM D5172-1991(2015) Standard Guide for Documenting the Standard Operating Procedures Used for the Analysis of Water《水分析使用标准操作规程的文件形成标准指南》.pdf

ASTM D5173-1997(2007) Standard Test Method for On-Line Monitoring of Carbon Compounds in Water by Chemical Oxidation by UV Light Oxidation by Both or by High Temperature Combustion.pdf

ASTM D5173-2015 Standard Guide for On-Line Monitoring of Total Organic Carbon in Water by Oxidation and Detection of Resulting Carbon Dioxide《通过氧化和检测产生二氧化碳在线监测水中总有机碳的标准指南》.pdf

ASTM D5174-2007 Standard Test Method for Trace Uranium in Water by Pulsed-Laser Phosphorimetry《用脉冲激光磷光光度法测定水中痕量铀的标准试验方法》.pdf

ASTM D5174-2007(2013) Standard Test Method for Trace Uranium in Water by Pulsed-Laser Phosphorimetry《用脉冲激光磷光光度法测定水中痕量铀的标准试验方法》.pdf