1、IEEE Guide for Common Format for Naming Intelligent Electronic Devices (COMDEV) IEEE Std C37.248-2017 IEEE Power and Energy Society Sponsored by the Power System Relaying and Control Committee (PSRC) IEEE 3 Park Avenue New York, NY 10016-5997 USAIEEE Std C37.248-2017 IEEE Guide for Common Format for
2、 Naming Intelligent Electronic Devices (COMDEV) Sponsor Power System Relaying and Control Committee (PSRC) of the IEEE Power and Energy Society Approved 06 December 2017 IEEE-SA Standards BoardAbstract: A common convention for naming physical and virtual intelligent electronic devices (IEDs) is prov
3、ided in this guide. The various environments where device names are needed and how a common naming convention would be beneficial is discussed. Keywords: channel name, device name, IED name, IEEE C37.248, virtual device The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New Y
4、ork, NY 10016-5997, USA Copyright 2018 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 25 May 2018. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality
5、, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEE
6、E standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about thr
7、ough developments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed
8、 by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropria
9、teness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AN
10、D ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE W AS FORESEEABLE.
11、4 Copyright 2018 IEEE. All rights reserved. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official sta
12、tements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of
13、IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revis
14、ion of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed chan
15、ge of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies an
16、d Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions
17、to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable l
18、aws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication
19、 of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so Copyrights IEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws. They are made available by IEEE and are adopte
20、d for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authori
21、ties and private users, IEEE does not waive any rights in copyright to the documents.5 Copyright 2018 IEEE. All rights reserved. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company
22、or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for ed
23、ucational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through t
24、he issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every 10 years. When a document is
25、more than 10 years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In orde
26、r to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE Xplore at http:/ ieeexplore .ieee .or g/ or contact IEEE at the address listed previously. For more information about the IEEE-SA o
27、r IEEEs standards development process, visit the IEEE-SA Website at http:/ standards .ieee .or g. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/ standards .ieee .org/ findstds/ errata/ index .html. Users are encouraged to check this
28、URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent right
29、s in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE- SA Website at http:/ standards .ieee .or g/ about/ sasb/ patcom/ patents .html. Letters of Assurance may indicate whethe
30、r the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist
31、 for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provi
32、ded in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely thei
33、r own responsibility. Further information may be obtained from the IEEE Standards Association.6 Copyright 2018 IEEE. All rights reserved. Participants At the time this IEEE guide was completed, the PSRC H23/Subs 18 Working Group had the following membership: J. Rick Cornelison, Chair James Bougie, C
34、o-Chair Eric Allen, Vice Chair Amir Makki, Secretary Mark Adamiak David Aldrich Alex Apostolov Farel Becker Matthew Black Christoph Brunner Ratan Das Michael Dood Kevin Easley Herb Falk James Formea Robert Frye Jalal Gohari James Hackett Ronald Landheer-Cieslak Deepak Maragal Craig Preuss Qun Qui Ge
35、orge Semati Charles Sufana Mark Taylor Eric Thibodeau Tim Tibbals Benton V andiver The following members of the individual balloting committee voted on this guide. Balloters may have voted for approval, disapproval, or abstention. William Ackerman Ali Al A wazi Mihaela Albu David Aldrich Eric Allen
36、Jay Anderson Philip Beaumont James Bougie Demetrio Bucaneg Jr. William Byrd Paul Cardinal J. Rick Cornelison Randall Cunico Ratan Das Alla Deronja Michael Dood Sourav Dutta Kenneth Fodero James Formea Paul Forquer Dale Fredrickson Fredric Friend Jean-Sebastien Gagnon V asudev Gharpure Mietek Glinkow
37、ski Jalal Gohari Roman Graf Stephen Grier Randall Groves James Hackett Roger Hedding Werner Hoelzl Jerry Hohn Dennis Holstein Noriyuki Ikeuchi Richard Jackson Anthony Johnson Piotr Karocki Hermann Koch Boris Kogan Richard Kolich Jim Kulchisky Marc Lacroix Ronald Landheer- Cieslak Theo Laughner Bruce
38、 Mackie Amir Makki Pierre Martin John McDonald Jerry Murphy R. Murphy Bruce Muschlitz Anthony Napikoski Arthur Neubauer Lorraine Padden Chris Pagni Subhash Patel Charles Rogers Daniel Sabin Steven Sano Bartien Sayogo Thomas Schossig George Semati Jeremy Smith Jerry Smith Brian Sparling Philip Spotts
39、 Gary Stoedter Walter Struppler Eric Thibodeau Michael Thompson Demetrios Tziouvaras James V an De Ligt Benton V andiver John V ergis Quintin V erzosa Ilia V oloh John Wang Scott Willy Philip Winston7 Copyright 2018 IEEE. All rights reserved. When the IEEE-SA Standards Board approved this guide on 0
40、6 December 2017, it had the following membership: Jean-Philippe Faure, Chair Gary Hoffman, Vice Chair John D. Kulick, Past Chair Konstantinos Karachalios, Secretary Chuck Adams Masayuki Ariyoshi Ted Burse Stephen Dukes Doug Edwards J. Travis Griffith Michael Janezic Thomas Koshy Joseph L. Koepfinger* Kevin Lu Daleep Mohla Damir Novosel Ronald C. Petersen Annette D. Reilly Robby Robson Dorothy Stanley Adrian Stephens Mehmet Ulema Phil Wennblom Howard Wolfman Y u Y uan *Member Emeritus
