1、 AMERICAN NATIONAL STANDARD ANSI/ISA-62769-109-1-2016 Field device integration (FDI) Part 109-1: Profiles HART and WirelessHART Approved 21 March 2016 ANSI/ISA-62769-109-1-2016, Field device integration (FDI) Part 109-1: Profiles HART and WirelessHART ISBN: 978-1-941546-96-3 Copyright 2016 IEC and I
2、SA. These materials are subject to copyright claims of IEC and ISA. No part of this publication may be reproduced in any form, including an electronic retrieval system, without the prior written permission of ISA. All requests pertaining to the ANSI/ISA-62769-109-1-2016 Standard should be submitted
3、to ISA. ISA 67 Alexander Drive P. O. Box 12277 Research Triangle Park, North Carolina 27709 USA 3 ANSI/ISA-62769-109-1-2016 Preface This preface, as well as all footnotes and annexes, is included for information purposes and is not part of ANSI/ISA-62769-109-1-2016. This document has been prepared a
4、s part of the service of ISA toward a goal of uniformity in the field of instrumentation. To be of real value, this document should not be static but should be subject to periodic review. Toward this end, the Society welcomes all comments and criticisms and asks that they be addressed to the Secreta
5、ry, Standards and Practices Board; ISA; 67 Alexander Drive; P. O. Box 12277; Research Triangle Park, NC 27709; Telephone (919) 549-8411; Fax (919) 549-8288; E-mail: standardsisa.org. The ISA Standards and Practices Department is aware of the growing need for attention to the metric system of units i
6、n general, and the International System of Units (SI) in particular, in the preparation of instrumentation standards. The Department is further aware of the benefits to USA users of ISA standards of incorporating suitable references to the SI (and the metric system) in their business and professiona
7、l dealings with other countries. Toward this end, this Department will endeavor to introduce SI-acceptable metric units in all new and revised standards, recommended practices, and technical reports to the greatest extent possible. Standard for Use of the International System of Units (SI): The Mode
8、rn Metric System, published by the American Society for Testing certifies industry professionals; provid es education and training; publishes books and technical articles; hosts conferences and exhibits; and provides networking and career development programs for its 40,000 members and 400,000 custo
9、mers around the world. ISA owns A, a leading online publisher of automation-related content, and is the founding sponsor of The Automation Federation (www.automationfederation.org), an association of non-profit organizations serving as “The Voice of Automation.“ Through a wholly owned subsidiary, IS
10、A bridges the gap between standards and their implementation with the ISA Security Compliance Institute (www.isasecure.org) and the ISA Wireless Compliance Institute (www.isa100wci.org). The following people served as members of ISA104: NAME COMPANY T. Blevins, Chair Emerson Process Management J. Ja
11、mison, Managing Director Encana Corporation R. Caro Consultant C. Diedrich University of Magdeburg R. Huang Southwest University C. Verney Consultant L. Winkel Siemens This standard was approved for publication by the ISA Standards and Practices Board on 17 February 2016. NAME COMPANY N. Sands, Vice
12、 President DuPont D. Bartusiak ExxonMobil Research any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates clo
13、sely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relev
14、ant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the t
15、echnical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum
16、extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies prov
17、ide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or
18、its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expense
19、s arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. Internatio
20、nal Standard IEC 62769-109-1 has been prepared by subcommittee 65E: Devices and integration in enterprise systems, of IEC technical committee 65: Industrial-process measurement, control and automation. The text of this standard is based on the following documents: CDV Report on voting 65E/356/CDV 65
21、E/419/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. ANSI/ISA-62769-109-1-2016 10 A list of all parts in the IEC 62769 series,
22、 published under the general title Field Device Integration (FDI), can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the sp
23、ecific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 11 ANSI/ISA-62769-109-1-2016 INTRODUCTION The International Electrotechnical Commission (IEC) draws attention to the fact that it is claimed that compliance with this document
24、 may involve the use of patents concerning a) method for the supplying and installation of device-specific functionalities, see Patent Family DE10357276; b) method and device for accessing a functional module of automation system, see Patent Family EP2182418; c) methods and apparatus to reduce memor
25、y requirements for process control system software applications, see Patent Family US2013232186; d) extensible device object model, see Patent Family US12/893,680. IEC takes no position concerning the evidence, validity and scope of this patent right. The holders of these patent rights have assured
26、the IEC that he/she is willing to negotiate licences either free of charge or under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holder of this patent right is registered with IEC. Information may be obtained from:
27、 a) ABB Research Ltd Claes Rytoft Affolterstrasse 4 Zurich, 8050 Switzerland b) Phoenix Contact GmbH CLASSIFICATION NETWORK_CONNECTION_POINT; CAN_DELETE FALSE; PROTOCOL HART; CONNECTION_POINT ConnectionPoint_TP5; VARIABLE DevAddr LABEL “Address“; CLASS DEVICE; TYPE UNSIGNED_INTEGER(5); HANDLING READ
28、 ANSI/ISA-62769-109-1-2016 20 VARIABLE DevMfg LABEL “Manufacturer“; CLASS DEVICE; TYPE UNSIGNED_INTEGER(2); HANDLING READ VARIABLE DevType LABEL “Device Type“; CLASS DEVICE; TYPE UNSIGNED_INTEGER(2); HANDLING READ VARIABLE DevRev LABEL “Device Revision“; CLASS DEVICE; TYPE UNSIGNED_INTEGER; HANDLING
29、 READ VARIABLE DevTag LABEL “Tag“; CLASS DEVICE; TYPE ASCII(32); HANDLING READ VARIABLE DevPollAddr LABEL “Poll Address“; CLASS DEVICE; TYPE UNSIGNED_INTEGER MAX_VALUE 15; /Define appropriate max value for various revisions HANDLING READ 21 ANSI/ISA-62769-109-1-2016 COLLECTION ConnectionPoint_TP5 LA
30、BEL “Connection Point“; MEMBERS ADDRESS, DevAddr, “Device Address“; MFG, DevMfg, “Manufacturer“; DEV_TYPE, DevType, “Device Type“; DEV_REV, DevRev, “Device Revision“; TAG, DevTag, “Device Tag“; POLL_ADDR, DevPollAddr, “Poll Address“; 5.5.1.3 HART_IP The ConnectionPoint type HART_IP shall be used to
31、identify CP 9/1 IP network communication and is defined in Table 9. HART_IP communications can be used on a variety of physical layers. Ethernet connections shall all use the HART_IP connection type. Additional physical layers developed in the future may also use the HART_IP connection type. The Con
32、nectionPoint type HART_IP is a subtype of abstract type ConnectionPointType defined in IEC 62769-5. The IPAddress property shall indicate the IP Address (up to 16 bytes) used for the connection. The IPVersion property shall indicate the version of IP used for the connection (either 4 or 6). The IPPo
33、rt property shall be the IP port number for the connection. The default port number used for HART IP is 5 094. The DevAddr property shall be the long address (5 bytes) for the device. The DevMfg property shall be the 2-byte Manufacturer ID, and can be used to help automate the process of assigning l
34、ive devices in the scan list to offline placeholders. The DevType property shall be the 2-byte extended device type, and can be used to help automate the process of assigning live devices in the scan list to offline placeholders. The DevRev property shall be the device revision, and can be used to h
35、elp automate the process of assigning live devices in the scan list to offline placeholders. The DevTag property shall be the long tag (with maximum 32 characters), and can be used to help automate the process of assigning live devices in the scan list to offline placeholders. ANSI/ISA-62769-109-1-2
36、016 22 Table 9 ConnectionPointType HART_IP Definition Attribute Value BrowseName ConnnectionPoint_HART_IP IsAbstract False References NodeClass BrowseName DataType TypeDefinition ModellingRule Inherits the properties of ConnectionPointType defined in IEC 62769-5 HasProperty Variable IPAddress ByteSt
37、ring PropertyType Mandatory HasProperty Variable IPVersion UInt8 PropertyType Mandatory HasProperty Variable IPPort UInt16 PropertyType Mandatory HasProperty Variable DevAddr UInt40 PropertyType Mandatory HasProperty Variable DevMfg UInt16 PropertyType Optional HasProperty Variable DevType UInt16 Pr
38、opertyType Optional HasProperty Variable DevRev UInt16 PropertyType Optional HasProperty Variable DevTag String PropertyType Optional The ConnectionPoint type HART_IP shall be described by an EDD element contained in a Communication Device related FDI Package that can drive a CP 9/1 network. Actual
39、ConnectionPoint properties are declared by VARIABLE constructs grouped together in a COLLECTION named ConnectionPoint_HART_IP. The following EDDL source code is an example describing an IP Connection Point. COMPONENT ConnectionPoint_HART_IP LABEL “HART IP Connection Point“; CLASSIFICATION NETWORK_CO
40、NNECTION_POINT; CAN_DELETE FALSE; PROTOCOL HART; CONNECTION_POINT ConnectionPoint_IP; ARRAY IPAddress LABEL “IP Address“; CLASS DEVICE; TYPE OCTET(16); HANDLING READ VARIABLE IPVersion LABEL “IP Version“; CLASS DEVICE; TYPE ENUMERATED 4, “IPv4“ , 6, “IPv6“ HANDLING READ 23 ANSI/ISA-62769-109-1-2016
41、VARIABLE IPPort LABEL “IP Port“; CLASS DEVICE; TYPE UNSIGNED_INTEGER (2); DEFAULT_VALUE 5 094; HANDLING READ COLLECTION ConnectionPoint_IP LABEL “Connection Point“; MEMBERS IPADDRESS, IPAddress, “IP Address“; IPVERSION, IPVersion, “IP Version“; IPPORT, IPPort, “IP Port“; ADDRESS, DevAddr, “Device Ad
42、dress“; MFG, DevMfg, “Manufacturer“; DEV_TYPE, DevType, “Device Type“; DEV_REV, DevRev, “Device Revision“; TAG, DevTag, “Device Tag“; 5.5.1.4 HART_TDMA The ConnectionPoint type HART_TDMA shall be used to identify CP 9/2 time division media access network communication and is defined in Table 10. HAR
43、T_TDMA communications can be used on a variety of physical layers. The ConnectionPoint type HART_TDMA is a subtype of abstract type ConnectionPointType defined in IEC 62769-5. WirelessHART connections shall all use the HART_TDMA connection type. Additional physical layers developed in the future may
44、 also use the HART_TDMA connection type. The Network property shall be the network ID for the network. The DevAddr property shall be the long address (5 bytes) for the device. The DevMfg property shall be the 2-byte Manufacturer ID, and can be used to help automate the process of assigning live devi
45、ces in the scan list to offline placeholders. The DevType property shall be the 2-byte extended device type, and can be used to help automate the process of assigning live devices in the scan list to offline placeholders. The DevRev property shall be the device revision, and can be used to help auto
46、mate the process of assigning live devices in the scan list to offline placeholders. The DevTag property shall be the long tag (with maximum 32 characters), and can be used to help automate the process of assigning live devices in the scan list to offline placeholders. ANSI/ISA-62769-109-1-2016 24 T
47、able 10 ConnectionPointType HART_TDMA Definition Attribute Value BrowseName ConnnectionPoint_HART_TDMA IsAbstract False References NodeClass BrowseName DataType TypeDefinition ModellingRule Inherits the properties of ConnectionPointType defined in IEC 62769-5. HasProperty Variable Network UInt16 Pro
48、pertyType Mandatory HasProperty Variable DevAddr UInt40 PropertyType Mandatory HasProperty Variable DevMfg UInt16 PropertyType Optional HasProperty Variable DevType UInt16 PropertyType Optional HasProperty Variable DevRev UInt16 PropertyType Optional HasProperty Variable DevTag String PropertyType O
49、ptional The ConnectionPoint type HART_TDMA shall be described by an EDD element contained in a Communication Device related FDI Package that can drive a CP 9/2 network. Actual ConnectionPoint properties are declared by VARIABLE constructs grouped together in a COLLECTION named ConnectionPoint_HART_TDMA. The following EDDL source code is an example describing a TDMA Connection Point.
