GB T 37501-2019 数控机床用单向走丝电火花加工用黄铜线.pdf

相关资源

JIS B6190-4-2008 机床试验规程.第4部分数控机床的圆弧检验.pdf

HB 6829-1993 数控机床用二齿直柄立铣刀 d=3~10mm.pdf

HB 6830-1993 数控机床用二齿削平型直柄立铣刀 d=6~20mm.pdf

HB 6831-1993 数控机床用三齿削平型直柄立铣刀 d=6~28mm.pdf

HB 6837-1993 数控机床用三齿端刃过中心莫氏锥柄立铣刀 d=14~28mm.pdf

HB 6838-1993 数控机床用四齿莫氏锥柄立铣刀 d=14~50mm.pdf

HB 6839-1993 数控机床用六齿莫氏锥柄立铣刀 d=22~63mm.pdf

HB 6840-1993 数控机床用普通立铣刀技术条件.pdf

HB 6949-1994 数控机床用可转位复合夹紧外圆车刀.pdf

HB 6950-1994 数控机床用可转位复合夹紧75'。偏头端面车刀.pdf

猜你喜欢

JUS C A2 052-1978 Steel Determination and verification ofthe effective epth ofcarburhed and hardened cases《钢件渗碳淬火有效硬化层深度的测定和校核》.pdf

JUS C A2 052-1987 Metals tests Determination of the effective depth ofcarburized and hardened cases ofsteels《金属的试验 钢件渗碳淬火有效硬化层深度的测定》.pdf

JUS C A2 053-1978 Steel - determination ofeffective depth of hardening after flame or induction hardening《钢的感应淬火或火焰淬火后有效硬化层深度的测定》.pdf

JUS C A2 054-1987 Metals tests Determination of total or effective thickness of thin surface-hardened layers of steels《金属的测试 钢件薄表面总硬化层深度或有效硬化层深度的测定》.pdf

JUS C A2 055-1995 Heat treatment of ferrous metals - Forms which use as order for heat-treatment《黑色金属热处理 热处理订单表》.pdf

JUS C A3 004-1985 Micrographic determination ofthe ferrftic or austenitic grain sfzo ofsteels《钢材中铁素体或奥氏体颗粒的显微测定》.pdf

JUS C A3 005-1987 Micrographic method for assessing the distribution ofcarbides in tool and bearing steels using reference photomkirographic《用标准图谱法评定碳化物分布的显微照相法》.pdf

JUS C A3 011-1985 Steel non alloy and low alloy Determination ofdepth of decarburization《钢材、非合金及低合金 脱碳程度测定》.pdf

JUS C A3 012-1985 Testing of metals Steel Macrographic examination by sulphurprint (Baumann method)《金属检测 钢材 硫印的目视检验（鲍曼（Baumann）法）》.pdf