YS T 79-2018 硬质合金焊接刀片.pdf

相关资源

JIS B4111-1991 拉制丝和杆用硬质合金模.pdf

JIS B4805-1994 硬质合金圆盘锯.pdf

JIS M3916-1983 矿山工具用硬质合金刀片.pdf

HB 777-1973 1~8级精度用硬质合金圆锥尾量头D6~30mm.pdf

HB 779-1973 1~8级精度用硬质合金套量头双头光面塞规D30~80mm.pdf

HB 781-1973 1~8级精度用硬质合金非全形单头带柄光面规D80~180mm.pdf

HB 787-1973 1~9级精度用硬质合金单头组合卡规D3~10mm.pdf

HB 788-1973 1~9级精度用硬质合金单头圆片形卡规D6~260mm.pdf

HB 798-1974 塞规用硬质合金环毛坯d=4.6~30.8mm.pdf

HB 799-1989 塞规卡规用硬质合金片毛坯.pdf

猜你喜欢

SAE AMS 7287-2012 Fluorocarbon Elastomer (FKM) High Temperature HTS Oil Resistant Fuel Resistant Low Compression Set 70 to 80 Hardness Low Temperature Tg -22 (-30 For Seals in O.pdf

SAE AMS 7290H-2013 Decalcomanias《贴花纸》.pdf

SAE AMS 7310L-2010 Rings Piston Cast Iron As Cast《铸铁和铸件活塞环》.pdf

SAE AMS 7320F-2011 Rings Sealing Cast Leaded-Tin Bronze 80Cu C 16Sn C 5Pb As Cast (UNS C92800)《铸态80Cu 16Sn 5Pb锡铅青铜铸铁环件和密封件》.pdf

SAE AMS 7322F-2012 Rings Sealing Cast Tin Bronze 80Cu - 19Sn As Cast (UNS C91300)《翻砂毛胚80Cu 19Sn铸锡青铜密封环材》.pdf

SAE AMS 7338-2013 Rubber Butyl (IIR Abbreviation) Phosphate Ester Resistant 65 to 75 Hardness For Seals In Hydraulic Systems etc 《橡胶 液压系统等密封用丁基(IIR缩写)磷酸酯耐受性65至75硬度》.pdf

SAE AMS 7379-2008 Rubber Fluorocarbon Elastomer (FKM) 70 to 80 Hardness Low Temperature Sealing Tg -40 (-40 For Elastomeric Seals in Aircraft Engine Oil Fuel and Hydraulics Systems.pdf

SAE AMS 7445D-2001 Balls Steel Corrosion-Resistant 17Cr Annealed (UNS S44002 S44003 S44004)《含17铬退火的耐腐蚀钢球UNS S44002 S44003 S44004》.pdf

SAE AMS 7488F-2013 Rings Flash Welded Aluminum and Aluminum Alloys《闪焊铝和铝合金环材》.pdf