SJ 21179-2016 印制电路用刚性基材环境试验方法.pdf

相关资源

SJ T 10500-1994 CH1型印制电路连接器.pdf

SJ 2070-1982 CY401型印制电路插座.pdf

SJ T 10499-1994 CY251型印制电路连接器.pdf

SJ T 10501-1994 CY3型印制电路插座连接器.pdf

SJ 20101-1992 KLC18型印制电路用双向按钮式指示轮编码开关详细规范（照明或非照明,密封或非密封,电磁干扰与射频干扰屏蔽或无屏蔽）.pdf

SJ 51438.5-1995 PM23型接触件间距为1.905mm的印制电路插头连接器详细规范.pdf

SJ 51438.6-1995 PM24型接触件间距为1.905mm的印制电路插座连接器详细规范.pdf

GB T 4723-2017 印制电路用覆铜箔酚醛纸层压板.pdf

GB T 4724-2017 印制电路用覆铜箔复合基层压板.pdf

SJ 20883-2003 印制电路组件装焊后的清洗工艺方法.pdf

猜你喜欢

NF S90-411-1988 Medico-surgical equipment Implants for surgery Osteosynthesis metal screws with asymmetrical thread and spherical under-surface Dimensions 《外科医疗设备 外科植入物 不对称螺纹和球形底座的.pdf

NF S90-414-1988 Medico-surgical equipment Implants for surgery Stainless steel osteosynthesis screw with asymmetrical thread and spherical fitting Mechanical requirements and testi.pdf

NF S90-416-1987 Medico-surgical equipment Implants for surgery Intramedullary nailing systems Part 2 medullary pins 《外科医疗设备 外科植入物 髓内插钉术系统 第2部分 髓状销》.pdf

NF S90-420-1986 Medico-surgical equipment Implants for surgery Intramedullary nailing systems Part 1 intramedullary nails with cloverleaf or V-shaped cross-section 《外科医疗设备 外科植入物 髓.pdf

NF S90-421-1989 Implants for surgery Metal bone screws with conical under-surfaces Dimensions 《外科植入物 圆锥形底座用金属螺钉 尺寸》.pdf

NF S90-422-1989 Implants for surgery Metal bone plates Holes and slots corresponding to screws with conical under-surface 《外科植入物 金属接骨板 与圆锥形底座螺钉相一致的孔和槽》.pdf

NF S90-425-1989 Implants for surgery Staples with parallel legs for orthopaedic use General requirements 《外科植入物 矫形外科用并联支柱 U 形钉 一般规范》.pdf

NF S90-426-1988 Medico-surgical equipment Implants for surgery Rough surface diaphysis plates made of stainless steel Dimensional and surface characteristics 《外科医疗设备 外科植入物 不锈钢粗糙表面骨.pdf

NF S90-427-1990 Medico-surgical equipment Osteosynthesis equipment for the rachis Forged stainless stell or cobalt alloy rachis plates System A Dimensions and geometry 《外科医疗设备 脊椎用接.pdf