DB44 T 429-2007 鱼苗药残监测抽样技术规范.pdf

相关资源

JIS B4313-2008 高速钢双排屑槽麻花钻.技术规范.pdf

JIS B0601-2001 产品几何量技术规范(GPS).表面结构轮廓法.术语、定义和表面结构参数.pdf

JIS B0680-2007 几何产品技术规范(GPS).几何产品技术规范和验收的标准参考温度.pdf

JIS B0641-1-2001 产品几何量技术规范(GPS).通过工件测量进行检验及测量设备.第1部分判定是否符合技术要求的规则.pdf

MT T 626-1996 矿井均压防灭火技术规范.pdf

NY T 682-2003 畜禽场场区设计技术规范.pdf

SC T 2003.1-2000 刺参增养殖技术规范 亲参.pdf

YB T 4257.1-2012 钢铁污水除盐技术规范 第1部分：反渗透法.pdf

GB T 16812-1997 NICAM-728卫星电视信道副载波传送数字声技术规范.pdf

猜你喜欢

FORD WSA-M2D451-A2-2008 HYDROGENATED NITRILE (HNBR) RUBBER TO BE USED WITH FORD WSS-M99P1111-A 《氢化丁腈橡胶(与WSS-M99P1111-A号福特材料一起使用)(用于WSS-M2D451-B号福特材料)》.pdf

FORD WSA-M2F182-A-2014 FABRIC VINYL COATED (PVC) MULTI-PURPOSE TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSA-M2P170-A1-2005 PAINT PERFORMANCE CORROSION HEAT RESISTANT COATING 150 max TO BE USED WITH FORD WSS-M99P1111-A 《最高工作温度150℃的耐腐蚀 耐高温油漆的性能 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSA-M2P170-A2-2005 PAINT PERFORMANCE CORROSION HEAT RESISTANT COATING 450 MAX TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSA-M2P170-A1 Supersedes ESEN-M91J8-B ESE-M99J1-A.pdf

FORD WSA-M2P170-A3-2009 PAINT PERFORMANCE CORROSION HEAT RESISTANT COATING 650 DEGREE C max TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSA-M2P170-A1)《最高耐受温度650℃的耐腐蚀 耐高温油漆.pdf

FORD WSA-M3D164-A-2004 UNSATURATED POLYESTER (UP) MODIFIED 50% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND (SMC) TO BE USED WITH FORD WSS-M99P1111-A 《50%玻璃纤维增强的不饱和聚酯(UP)片状成型料 .pdf

FORD WSA-M3D173-A3-2005 VINYL ESTER (VE) MODIFIED 35% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《35%玻璃纤维增强的乙烯基酯(VE)改性片状成型料 与标准FORD WSS-M9.pdf

FORD WSA-M4D688-A1-2008 ABS + POLYCARBONATE BLEND (ABS+PC) IMPACT MODIFIED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《冲击改性丙烯腈-丁二烯-苯乙烯+聚碳酸酯(ABS+PC)共混物模塑( 和FORD WSS-M99P.pdf

FORD WSA-M4D688-A2-2008 ABS + POLYCARBONATE BLEND (ABS+PC) IMPACT MODIFIED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSA-M4D688-A1)《丙烯腈-丁二烯-苯乙烯共聚物(ABS)+.pdf