NY T 3521-2019 马铃薯面条加工技术规范.pdf

相关资源

JIS B4313-2008 高速钢双排屑槽麻花钻.技术规范.pdf

JIS B0601-2001 产品几何量技术规范(GPS).表面结构轮廓法.术语、定义和表面结构参数.pdf

JIS B0680-2007 几何产品技术规范(GPS).几何产品技术规范和验收的标准参考温度.pdf

JIS B0641-1-2001 产品几何量技术规范(GPS).通过工件测量进行检验及测量设备.第1部分判定是否符合技术要求的规则.pdf

MT T 626-1996 矿井均压防灭火技术规范.pdf

NY T 682-2003 畜禽场场区设计技术规范.pdf

SC T 2003.1-2000 刺参增养殖技术规范 亲参.pdf

YB T 4257.1-2012 钢铁污水除盐技术规范 第1部分：反渗透法.pdf

GB T 16812-1997 NICAM-728卫星电视信道副载波传送数字声技术规范.pdf

猜你喜欢

AECMA PREN 2603-1987 Aerospace Series Straight Metric-Size Unions with Locking Ring Port End Dimensions Issue P 1《航空航天系列公制尺寸直管活结锁紧环接口末端尺寸》.pdf

AECMA PREN 2604-1987 Aerospace Series Straight Metric-Size Unions with Locking Ring 8 Degrees 30' Union Interface Dimensions Issue P 1《航空航天系列公制尺寸直管活结锁紧环接口界面尺寸8°、30'》.pdf

AECMA PREN 2605-1987 Aerospace Series Straight Metric-Size Unions with Locking Ring 24 Degrees Union Interface Dimensions Issue P 1《航空航天系列公制尺寸直管活结锁紧环接口界面尺寸24°》.pdf

AECMA PREN 2606-2008 Aerospace series 60 degrees interface for adaptors threaded with lockring Geometric configuration Edition P1《航空航天系列.60度带锁环的螺纹适配器接口.几何结构.版本P1》.pdf

AECMA PREN 2607-1987 Aerospace Series Straight Metric-Size Unions with Locking Ring Configuration O-Ring Dimensions Issue P 1《航空航天系列公制尺寸直管活结O-形锁紧环尺寸》.pdf

AECMA PREN 2608-1999 Aerospace Series Installation and Removal Requirements for 8 Degree 30' Adaptors Threaded with Lockring Edition P 1《航空航天系列带锁环的8°、30'螺纹适配器的锁环安装和移除要求》.pdf

AECMA PREN 2609-1985 Aerospace Series Turnbarrels Control Cable in Copper-Zinc Alloys Dimensions and Loads Edition 1《航空航天系列操纵缆绳用铜锌合金套筒尺寸和荷载》.pdf

AECMA PREN 2615-1986 Aerospace Series Wire to Close Tolerance in Aluminium and Aluminium Alloys 1 6 Less Than or Equal to D Less Than or Equal to 9 6 mm Dimensions Issue P 1《航空航天系列.pdf

AECMA PREN 2616-1986 Aerospace Series Wire for Rivets in Aluminium and Aluminium Alloys Large Tolerances D Less Than or Equal to 10 mm Dimensions Issue P 1《航空航天系列铝及铝合金柳钉线材尺寸最大允许偏差直.pdf