GY T 303.8-2024 智能电视操作系统 第8部分：分类分级.pdf

相关资源

JIS B9936-2001 液压动力.粒子污染分析.操作系统线路上液体样品的提取.pdf

CJ T 304-2008 建设事业CPU卡操作系统技术要求.pdf

JIS X3030-1994 便携式操作系统接口装置(POSIX).第1部分系统应用程序接口(API)(C 语言).pdf

JIS X3031-2001 便携式操作系统接口装置(POSIX).第2部分命令解释程序和实用程序.pdf

DL T 687-2010 微机型防止电气误操作系统通用技术条件.pdf

GA 135-1996 DOS操作系统环境中计算机病毒防治产品测试方法.pdf

GA T 388-2002 计算机信息系统安全等级保护操作系统技术要求.pdf

QJ 2846-1996 防静电操作系统通用规范.pdf

GB T 30284-2013 移动通信智能终端操作系统安全技术要求（EAL2级）.pdf

GB T 33264-2016 面向多核处理器的机器人实时操作系统应用框架.pdf

猜你喜欢

FORD WSS-M4D908-A2-2006 ACRYLONITRILE BUTADIENE STYRENE (ABS) HEAT RESISTANT POST CONSUMER RECYCLATE MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSB-M4D908-A)《.pdf

FORD WSS-M4D911-B-2011 POLYPROPYLENE (PP) COPOLYMER HIGH IMPACT 100% RECYCLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《耐冲击100%回收的聚丙烯(PP)共聚物模塑材料 与福特WSS-M99P1111-A 一.pdf

FORD WSS-M4D924-B1-2015 POLYCARBONATE ACRYLONITRILE BUTADIENE STYRENE BLEND (PC+ABS) MEDIUM IMPACT MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D924-B2-2016 POLYCARBONATE ACRYLONITRILE BUTADIENE POLYCARBONATE ACRYLONITRILE BUTADIENE MOLDING COMPOUND INTERIOR ANTI-SQUEAK TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D926-A2-2010 POLYCARBONATE (PC) IMPACT MODIFIED 25% MINIMUM RECYCLED CONTENT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《冲击改良25%最低回收成分的聚碳酸酯(PC)模塑材料 与福特WSS-M.pdf

FORD WSS-M4D927-A1-2015 POLYPROPYLENE (PP) HOMOPOLYMER 30% MINERAL FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D928-A2-2010 POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC+PBT) MODIFIED MOLDING COMPOUND RECYCLATE 25% MINIMUM RECYCLED CONTENT TO BE USED WITH FORD WSS-M99P111.pdf

FORD WSS-M4D929-A2-2012 POLYBUTYLENE TEREPHTHALATE (PBT) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D929-A3-2006 POLYBUTYLENE TEREPHTHALATE 30 % GLASS FILLED INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用30 %玻璃填充的聚对苯二甲酸丁二醇酯 与标准FORD WSS-M99P1111-A一起使用 》.pdf