HB 7716.17-2022 钛合金化学成分光谱分析方法 第 17 部分：电感耦合等离子体原子发射光谱法测定硼含量.pdf

相关资源

JIS G1258-2-2007 铁及钢—ICP发光光谱分析方法—第2部：锰、镍、铬、钼、铜、钨、钒、钴、钛及铌定量方法—硫酸磷酸分解法.pdf

JIS K0119-1997 X射线萤光光谱分析方法通则.pdf

JIS C6192-2008 光谱分析仪的校准.pdf

JIS C6122-5-1-2001 光纤放大器.试验方法.第5-1部分反射参数试验方法.光谱分析仪试验方法.pdf

JIS G1256-1997 钢铁的X射线荧光光谱分析法 Iron and steel -- Method for X-ray fluorescence spectrometric analysis.pdf

JIS G1257-1994 钢铁.原子吸收光谱分析方法 Iron and steel -- Methods for atomic absorption spectrometric analysis.pdf

HB 5219.13-1998 镁合金化学分析方法原子吸收光谱分析法测定锌含量.pdf

DL T 991-2006 电力设备金属光谱分析技术导则.pdf

HB 5219.11-1998 镁合金化学分析方法原子吸收光谱分析法测定镍含量.pdf

HB 5219.3-1998 镁合金化学分析方法原子吸收光谱分析法测定铜含量.pdf

猜你喜欢

REG NASA-TM-X-71763-1975 Interim prediction method for fan and compressor source noise.pdf

REG NASA-TM-X-72078-1973 Characteristics of Coupled Nongray Radiating Gas Flows with Ablation Product Effects About Blunt Bodies During Planetary Entries.pdf

REG NASA-TM-X-72697-1975 Low-speed aerodynamic characteristics of a 13-percent-thick airfoil section designed for general aviation applications.pdf

REG NASA-TM-X-74018-1977 Low-speed wind tunnel results for a modified 13-percent-thick airfoil.pdf

REG NASA-TN-2601-1952 Compressive Buckling of Simple supported Curved Plates and Cylinders of Sandwich Construction.pdf

REG NASA-TN-636-1938 The estimation of the rate of change of yawing moment with sideslip.pdf

REG NASA-TN-D-1057-1961 Analysis of X-15 landing approach and flare characteristics determined from the first 30 flights.pdf

REG NASA-TN-D-1259-1962 Unified Notch-Strength Analysis for Wrought Aluminum Alloys.pdf

REG NASA-TN-D-1522-1962 Variable-amplitude fatigue tests with particular attention to the effects of high and low loads.pdf