HB 8736-2023 民用垂直起降固定翼无人机系统通用要求.pdf

相关资源

HB_Z 413-2013(2017) 民用飞机结构耐久性设计准则.pdf

HB_Z 422-2014(2017) 民用飞机综合模块化航空电子系统开发与认证指南.pdf

HB_Z 407.1-2013(2017) 铝合金零件压弯成形与校形工艺 第1部分：壁板类零件.pdf

HB_Z 410-2013(2017) 树脂基复合材料制件修补工艺.pdf

HB_Z 421-2014(2017) 民用飞机机载系统和设备软件合格审定保证指南.pdf

HB_Z 416-2014(2017) 航空铝合金构件搅拌摩擦焊工艺.pdf

HB_Z 409-2013(2017) 树脂基复合材料制件机械加工工艺.pdf

HB_Z 414-2014(2017) 民用飞机供电管理通用指南.pdf

HB_Z 419-2017 民用飞机用钛及钛合金热处理工艺.pdf

HB 9114-2012(2017) 航空企业直接发货指南.pdf

猜你喜欢

FORD WSS-M3G238-A2-2017 TAPE TRANSIT FILM REMOVABLE WHEELS TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M3G238-A1).pdf

FORD WSS-M3G238-A3-2010 TAPE TRANSIT FILM REMOVABLE EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用可清除的TRANSIT膜胶带 与标准FORD WSS-M99P1111-A一起使用 列于标准FORD WSS-M3G238-A1上》.pdf

FORD WSS-M3G238-A3-2017 TAPE TRANSIT FILM REMOVABLE EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M3G238-A1).pdf

FORD WSS-M3H104-A3-2001 CARPET POLYESTER DILOUR NEEDLED MOLDABLE - LATEX PRECOAT POLYETHYLENE BACKCOATED《聚乙烯背衬的乳胶预涂层的DILOUR针刺可模压聚酯地毯》.pdf

FORD WSS-M3H104-A4-2001 CARPET POLYESTER DILOUR NEEDLED MOLDABLE - LATEX PRECOAT POLYETHYLENE BACKCOATED AND EVA BACKCOATED (Shown on WSS-M3H104-A3)《背面涂布聚乙烯和乙烯-乙酸乙烯共聚物(EVA)的乳胶预涂层的D.pdf

FORD WSS-M3H104-A4-2015 CARPET POLYESTER DILOUR NEEDLED MOLDABLE - LATEX PRECOAT POLYETHYLENE AND EVA BACKCOATED TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M3H104-A3).pdf

FORD WSS-M3H104-A5-2008 CARPET POLYPROPYLENE DILOUR NEEDLED - LATEX BACKCOATED LDPE EXTRUSION BACKED - TO BE USED WITH FORD WSS-M99P1111-A 《低密度聚乙烯(LDPE)挤压料背衬、乳胶背涂的DILOUR针刺聚丙烯(PP).pdf

FORD WSS-M3H104-A7-2014 CARPET POLYESTER NON WOVEN DILOUR POLYETHYLENE BACKED MOLDABLE 240 G M2 (7 OZ) NOMINAL FACE TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M3H105-A10-2008 CARPET POLYESTER FLAT NEEDLED LATEX BACKCOATED - TO BE USED WITH FORD WSS-M99P1111-A 《乳胶背涂的聚酯扁平针刺地毯 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSS-M15P32-C］》.pdf