LS T 8005-2023 农户小型粮仓建造技术规范.pdf

相关资源

JIS B4313-2008 高速钢双排屑槽麻花钻.技术规范.pdf

JIS B0601-2001 产品几何量技术规范(GPS).表面结构轮廓法.术语、定义和表面结构参数.pdf

JIS B0680-2007 几何产品技术规范(GPS).几何产品技术规范和验收的标准参考温度.pdf

JIS B0641-1-2001 产品几何量技术规范(GPS).通过工件测量进行检验及测量设备.第1部分判定是否符合技术要求的规则.pdf

MT T 626-1996 矿井均压防灭火技术规范.pdf

NY T 682-2003 畜禽场场区设计技术规范.pdf

SC T 2003.1-2000 刺参增养殖技术规范 亲参.pdf

YB T 4257.1-2012 钢铁污水除盐技术规范 第1部分：反渗透法.pdf

GB T 16812-1997 NICAM-728卫星电视信道副载波传送数字声技术规范.pdf

GA 425.1-2003 指纹自动识别系统基础技术规范 第1部分 指纹自动识别系统术语.pdf

猜你喜欢

FORD WSH-M2D463-A-2009 HYDROGENATED NITRILE BUTADIENE RUBBER (HNBR) REFRIGERANT AND OIL RESISTANT O-RINGS TO BE USED WITH FORD WSS-M99P1111-A 《氢化丁腈橡胶（HNBR）耐制冷剂和油O形环 与标准FORD WSS-.pdf

FORD WSH-M2D479-A-2010 ETHYLENE PROPYLENE RUBBER (EPDM) 25% MINIMUM RECYCLED CONTENT TO BE USED WITH FORD WSS-M99P1111-A 《再生料比例最低25%的三元乙丙橡胶（EPDM） 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSH-M4D293-B2-2013 POLYPROPYLENE (PP) HOMOPOLYMER HEAT STABILIZED 20% MINERAL FILLED 25% MINIMUM RECYCLED CONTENT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSH-M4D587-A-2005 POLYAMIDE (PA) 66 HEAT STABILIZED 20% GLASS FIBER REINFORCED ENGINE COOLANT RESISTANT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《耐发动机冷却液 20%玻璃纤维.pdf

FORD WSH-M4D669-A2-2006 POLYAMIDE (PA) 66 HEAT STABILIZED 13% GLASS FIBER REINFORCED 100% POST INDUSTRIAL OR 25% POST CONSUMER RECYCLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M.pdf

FORD WSH-M4D724-A3-2013 STYRENE MALEIC ANHYDRIDE (SMA) COPOLYMER RUBBER MODIFIED 20% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSH-M4D832-A-2010 POLYPROPYLENE (PP) HOMOPOLYMER 10% WOLLASTONITE FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《10%硅灰石填充的聚丙烯（PP）均聚物成型料 与标准FORD WSS-M99P1111-A.pdf

FORD WSH-M4D888-A1-2010 POLYETHYLENE TEREPHTHALATE (PET) 45 % GLASS FIBER REINFORCED MOLDING COMPOUND 100 % RECYCLED TO BE USED WITH FORD WSS-M99P1111-A 《45%玻璃纤维增强的100%再生的聚对苯二甲酸乙.pdf

FORD WSH-M4D917-A-2006 POLYAMIDE 6 (PA6) 33% GLASS MINERAL REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D822-A)《33%玻璃 矿物增强的聚酰胺6(PA6)成型料 与标准FORD WSS.pdf