QC T 29087-2023 汽车焊接加工零件未注公差尺寸的极限偏差.pdf

相关资源

QC T 734-2024 摩托车和轻便摩托车发动机密封性能技术要求与试验方法.pdf

QC T 822-2024 汽车用压力传感器.pdf

QC T 735-2025 摩托车和轻便摩托车用方向把.pdf

QC T 674-2024 汽车用压缩天然气电磁阀.pdf

QC T 750-2024 清洗车.pdf

QC T 283-2025 汽车发动机 镶耐磨圈活塞.pdf

QC T 552-2025 汽车、摩托车发动机 铸造铝活塞.pdf

QC T 1226-2025 道路车辆 带宽至10 GHz屏蔽平衡电缆.pdf

QC T 983-2025 汽车变速器总成清洁度检测方法.pdf

QC T 554-2024 汽车、摩托车发动机活塞环.pdf

猜你喜欢

STAS 9375-1973 SURFACE AND WASTE WATER Determination of silicon content《地表水和废水 硅含量的测定 》.pdf

STAS 9376-1982 General purpose rubber belt conveyors FIXED CONVEYORS General technical requirements for quality《通用橡胶带式输送机 固定带式输送机 一般质量技术要求 》.pdf

STAS 9377-1980 SEAMLESS STEEL TUBES FOR HEAT-EXCHANGER《热交换器用的无缝钢管 》.pdf

STAS 9378-1987 SEAMLESS STEEL TUBES FOR LOW TEMPERATURES《低温无缝钢管 》.pdf

STAS 9379-1974 Radio disturbances CONDENSERS CHOKES RESISTORS AND FILTERS USED FOR RADIOELECTRIC SHIELDING Methods for the determination of highfrequency characteristics《无线电干扰.用于无.pdf

STAS 9380-1980 Petroleum equipment WELL CASING PACKERS《石油装备 井筒灌浆机 》.pdf

STAS 9381-1988 Motor vehicles TELESCOPIC HYDRAULIC SHOCK ABSORBES General technical requirements for quality《机动车辆 伸缩式水力减震器 一般质量技术要求 》.pdf

STAS 9382 1-1989 STEELS USED FOR ASSEMBLING COMPONENTS MANUFACTURE BY COLD FLOW General technical requirements for quality《低温流动用于装配构件制造的未经处理的钢 一般质量技术要求 》.pdf

STAS 9382 2-1989 UNTREATED STEELS USED FOR ASSEMBLING COMPONENTS MANUFACTURE BY COLD FLOW Grades and technical requirements for quali《低温流动用于装配构件制造的未经处理的钢 等级和质量技术要求 》.pdf