YD T 5267-2023 多接入边缘计算系统工程技术规范.pdf

相关资源

GB T 22032-2008 系统工程.系统生存周期过程.pdf

CJJ 113-2007 生活垃圾卫生填埋场防渗系统工程技术规范.pdf

CJJ T 216-2014 燃气热泵空调系统工程技术规程.pdf

JTJ T 343-1996 港口地区有线电话通信系统工程设计规范.pdf

GA T 651-2006 公安交通指挥系统工程建设通用程序和要求.pdf

YD 5018-1996 海底光缆数字传输系统工程设计规范.pdf

YD 5018-2005 海底光缆数字传输系统工程设计规范.pdf

YD 5032-1997 会议电视系统工程设计规范.pdf

TB T 10034-2005 铁路无人值守机房环境远程监控系统工程设计规范.pdf

YD T 5027-2005 通信电源集中监控系统工程设计规范.pdf

猜你喜欢

DIN 6353-2010 Lathe chucks power-operated without trough-hole - Cross tenon type jaw mounting《无通孔动力操作车床卡盘 十字榫式颚支架 》.pdf

DIN 6354-1980 Milling machine arbors with steep taper complete《精加工的大锥体铣刀轴》.pdf

DIN 6355-1980 Clamping Devices Milling Machine Arbors with Taper《夹紧装置 带锥度铣床心轴》.pdf

DIN 6357-1988 Holding arbors with taper shank 7 24 for milling cutters and face milling cutters with internal alignment《内校准的铣刀和平面铣刀的7 24锥柄的铣刀杆》.pdf

DIN 6358-1988 Milling machine arbors with taper shank 7 24 for milling cutter with longitudinal or transverse drive《带纵向或横向传动装置的铣刀的 7 24 锥形刀杆的铣床刀杆主轴》.pdf

DIN 6359-1-1996 Reduction sleeves with 7 24 taper shank for parallel shanks with lateral driving surface and inclined clamping surface - Part 1 Type A with 7 24 taper shank in acco.pdf

DIN 6359-2-1996 Reduction sleeves with 7 24 taper shank for parallel shanks with lateral driving surface and inclined clamping surface - Part 2 Type B with 7 24 taper shank in acco.pdf

DIN 6360-1983 Milling machine arbors with 7 24 taper for milling cutters with longitudinal and transverse drive《带纵向和横向传动的铣刀用 7 24 锥度铣床刀柄》.pdf

DIN 6364-2000 Reduction sleeves with external taper shank 7 24 for morse taper shank with tightening thread《带紧定螺纹的莫氏锥柄用7 24外锥柄异径连接套管》.pdf