DB12 T 197-2024 小麦玉米两茬平作保护性耕作技术规范.pdf

相关资源

JIS B4313-2008 高速钢双排屑槽麻花钻.技术规范.pdf

JIS B0601-2001 产品几何量技术规范(GPS).表面结构轮廓法.术语、定义和表面结构参数.pdf

JIS B0680-2007 几何产品技术规范(GPS).几何产品技术规范和验收的标准参考温度.pdf

JIS B0641-1-2001 产品几何量技术规范(GPS).通过工件测量进行检验及测量设备.第1部分判定是否符合技术要求的规则.pdf

MT T 626-1996 矿井均压防灭火技术规范.pdf

NY T 682-2003 畜禽场场区设计技术规范.pdf

SC T 2003.1-2000 刺参增养殖技术规范 亲参.pdf

YB T 4257.1-2012 钢铁污水除盐技术规范 第1部分：反渗透法.pdf

GB T 16812-1997 NICAM-728卫星电视信道副载波传送数字声技术规范.pdf

GA 425.1-2003 指纹自动识别系统基础技术规范 第1部分 指纹自动识别系统术语.pdf

猜你喜欢

ASTM D5293-2004 Standard Test Method for Apparent Viscosity of Engine Oils Between -5 and -35&176 C Using the Cold-Cranking Simulator《用低温开裂模拟器测定-5～-30℃之间发动机油表观粘度的标准试验方法》.pdf

ASTM D5293-2008 Standard Test Method for Apparent Viscosity of Engine Oils Between -5 and -35&176 C Using the Cold-Cranking Simulator.pdf

ASTM D5293-2008e1 Standard Test Method for Apparent Viscosity of Engine Oils Between -5 and -35&176 C Using the Cold-Cranking Simulator.pdf

ASTM D5293-2009 Standard Test Method for Apparent Viscosity of Engine Oils Between -5 and -35&176 C Using the Cold-Cranking Simulator.pdf

ASTM D5293-2010 Standard Test Method for Apparent Viscosity of Engine Oils Between -5 and -35&176 C Using the Cold-Cranking Simulator《使用冷启动模拟器测定机油在-5℃、-35℃和176℃时的表观粘度的标准试验方法》.pdf

ASTM D5293-2010e1 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between &x2013 5 and &x2013 35&x00B0 C Using Cold-Cranking Simulator《使用冷启动模拟器测定机油表面粘度和x.pdf

ASTM D5293-2014 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between &ndash 5° C and &ndash 35° C Using Cold-Cranking Simulator《使用冷起动模拟器对5℃至35℃之.pdf

ASTM D5295 D5295M-2014 Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems《用水密材料粘结薄膜制备混凝土表面的标准指南》.pdf

ASTM D5295 D5295M-2018 Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems《粘合(粘合)膜防水系统用混凝土表面制备的标准指南》.pdf