DB3309 T 2004-2024 渔获物船上保鲜技术规范.pdf

相关资源

JIS B4313-2008 高速钢双排屑槽麻花钻.技术规范.pdf

JIS B0601-2001 产品几何量技术规范(GPS).表面结构轮廓法.术语、定义和表面结构参数.pdf

JIS B0680-2007 几何产品技术规范(GPS).几何产品技术规范和验收的标准参考温度.pdf

JIS B0641-1-2001 产品几何量技术规范(GPS).通过工件测量进行检验及测量设备.第1部分判定是否符合技术要求的规则.pdf

MT T 626-1996 矿井均压防灭火技术规范.pdf

NY T 682-2003 畜禽场场区设计技术规范.pdf

SC T 2003.1-2000 刺参增养殖技术规范 亲参.pdf

YB T 4257.1-2012 钢铁污水除盐技术规范 第1部分：反渗透法.pdf

GB T 16812-1997 NICAM-728卫星电视信道副载波传送数字声技术规范.pdf

GA 425.1-2003 指纹自动识别系统基础技术规范 第1部分 指纹自动识别系统术语.pdf

猜你喜欢

FORD WRS-M4D578-B2-2017 POYLAMIDE (PA) 6 HEAT STABILIZED IMPACT MODIFIED 35% GLASS FIBER REINFORCED MOLDING COMPOUND 65% RECYCLED MATERIAL BY WEIGHT TO BE USED WITH FORD WSS-M99P1.pdf

FORD WRS-M4D582-B2-2011 POLYBUTYLENE TEREPHTHALATE (PBT) POLYETHYLENE TEREPHTHALATE (PET) HEAT STABILIZED 50% GLASS FIBER REINFORCED MOLDING COMPOUND 18% PCR CONTENT TO BE USED WI.pdf

FORD WRS-M4D585-C2-2015 POLYCARBONATE ACRYLONITRILE BUTADIENE STYRENE BLEND (PC+ABS) MOLDING COMPOUND RECYCLED 100% PCR PIR RESIN CONTENT TO BE USED WITH FORD WSS-M99P1111-A (Sho.pdf

FORD WRS-M4D585-C2-2017 POLYCARBONATE ACRYLONITRILE BUTADIENE STYRENE BLEND (PC+ABS) MOLDING COMPOUND RECYCLED 100% PCR PIR RESIN CONTENT TO BE USED WITH FORD WSS-M99P1111-A (Sho.pdf

FORD WRS-M4D625-A3-2016 POLYESTER MOLDING COMPOUND (PBT+PET) 40% GLASS MINERAL FILLED MOLDED-IN-COLOR INTERIOR 25% PCR RESIN CONTENT 15% RECYCLED MATERIAL BY WEIGHT TO BE USED WIT.pdf

FORD WRS-M4D643-B2-2013 POLYPROPYLENE (PP) 40% MINERAL FILLED INJECTION MOLDING COMPOUND RECYCLED WITH 25% PCR AND OR PIR CONTENT TO BE USED WITH FORD WSS-M99P1111-A (Shown on FO.pdf

FORD WRS-M4D643-B3-2013 POLYPROPYLENE (PP) 40% MINERAL FILLED INJECTION MOLDING COMPOUND RECYCLED WITH 50% PCR AND OR PIR CONTENT TO BE USED WITH FORD WSS-M99P1111-A (Shown on FO.pdf

FORD WRS-M4D648-B3-2018 POLYAMIDE (PA) 66 HEAT STABILIZED MOLDING COMPOUND 100% RECYCLED MATERIAL BY WEIGHT TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M4D648-B1).pdf

FORD WRS-M4D664-B2-2011 POLYAMIDE (PA) 6 HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND INTERIOR XX% PCR AND OR PIR CONTENT TO BE USED WITH FORD WSS-M99P1111-A (Show.pdf