HB 4589-1992 加工轻合金二齿立铣刀用偏背刀 D=56~63mm.pdf

相关资源

HB 6923-1994 二齿粗加工立铣刀用偏背刀用于HB 6910-94;HB 6913-94D=56~63mm.pdf

HB 6938-1994 二齿球头立铣刀用偏背刀 用于HB 6929-94 HB 6932-94 D=56~63mm.pdf

HB 6927-1994 三齿粗加工立铣刀用偏背刀用于HB 6911~6912-94;HB 6914~6915-94D=75~80mm.pdf

HB 4589-1992 加工轻合金二齿立铣刀用偏背刀 D=56～63mm.pdf

HB 6923-1994 二齿粗加工立铣刀用偏背刀.用于HB 6910～94 HB 6913-94.D=56～63mm.pdf

HB 6927-1994 三齿粗加工立铣刀用偏背刀.用HB 6911～6912-94 HB 6914～6915-94.D=75～80mm.pdf

HB 4589-1992 加工轻合金二齿立铣刀用偏背刀.D=56～63mm.pdf

HB 6938-1994 二齿球头立铣刀用偏背刀.用HB 6929-94 HB 6932-94.D=56～63mm.pdf

猜你喜欢

JIS K6298-2009 Rubber, raw natural and raw synthetic- Sampling and further preparative procedures.pdf

JIS K6299-2001 Rubber -- Preparation of test pieces.pdf

JIS K6300-1-2001 Rubber, unvulcanized -- Physical property -- Part 1：Determination of Mooney viscosity and pre-vulcanization characteristics with Mooney viscometer.pdf

JIS K6300-2-2001 Rubber, unvulcanized -- Physical property -- Part 2：Determination of cure characteristics with oscillating curemeters.pdf

JIS K6300-3-2001 Rubber, unvulcanized -- Physical testing methods -- Part 3：Determination of plasticity and plasticity retention index (PRI) with rapid-plastimeter.pdf

JIS K6302-1994 Pneumatic tyres for bicycles.pdf

JIS K6302-2011 自転車－タイヤ.pdf

JIS K6304-1994 Inner tubes for bicycle tyres.pdf

JIS K6313-2012 Reclaimed rubbers (Amendment 2).pdf